Posts: 1,190
Threads: 50
Joined: Oct 2017
City: Allendale, MI
I soaked the idler in brake fluid for a day (read about that on a forum) and the turntable now works. It still slows during the automatic cycles but I don't have help it along anymore. There is a stereo cartridge in the tone arm but it sounds horrible. There is no indication of the manufacturer of the cartridge so hard to find a new needle. I may see what cartridge I can find to be able to play LP's. I hooked up a Dual with a magnetic cartridge and a phono pre. It sound s pretty good! I have a couple of extra turntables so that may be a more practical way of doing it. Then again, I doubt the radio will be used that way so maybe it's not worth the effort! Just leave the Garrard for looks.
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
Try doing a search on eBay for "crystal phono cartridge." I just did, and there are quite a few available. You may well find something that will fit in your tone arm.
Posts: 68
Threads: 7
Joined: Oct 2017
City: bloomfield, ct
Hi,
I have a Scott All Wave 23 in a Waverley cabinet with the Garrard RC88 /4 which is the similar to the RC98 that you have but without the turntable speed manual adjustment. I have a GE Variable Reluctance cartridge (and preamp). The cartridge is mono and has two stylus. 1 for 78 and 1 for microgroove records. I like it very much and sounds great on both 78 and mono microgroove. I actually have 2 identical Garrard changers. The other one is in a mid 50's Fischer Electra. Yes, would recommend the GE VR cartridge setup.
Posts: 1,190
Threads: 50
Joined: Oct 2017
City: Allendale, MI
thanks! I'll look it up. Does yours have the push down and turn stylus? What version of the GE cartridge do you have?
(This post was last modified: 03-31-2020, 10:26 PM by rfeenstra.)
Posts: 68
Threads: 7
Joined: Oct 2017
City: bloomfield, ct
Hi,
The cartridge in the Scott Garrard is marked VRII. And yes, it is the "push down and turn" version with 2 styli (styluses?).
Posts: 1,190
Threads: 50
Joined: Oct 2017
City: Allendale, MI
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
For anyone who is working on, or very interested in E.H. Scott, or Scott Radio Labs receivers, I recommend you visit https://ehscott.ning.com/ . They are a similar site to this one specializing in Scott receivers. I found them when looking for information on my SRLM using Duck Duck Go. Lots of good folks there who have experience with Scott receivers, just as the folks here specialize in Philco.
Posts: 1,190
Threads: 50
Joined: Oct 2017
City: Allendale, MI
Oh oh!! I just let the smoke out of the Philly! It's been playing beautifully for days. Now I gotta put the 37-116 aside and figure out what happened.
Posts: 1,190
Threads: 50
Joined: Oct 2017
City: Allendale, MI
A plate resistor on an 6J5 smoked. These are carbon resistors with a ceramic housing. There is a part of me that likes to replace all resistors for the sake of reliability.
Posts: 1,287
Threads: 44
Joined: Nov 2017
City: Menlo Park
State, Province, Country: CA
I'm glad it wasn't more serious. When I read the word smoke, all sorts of unfortunate scenarios came to mind.
I don't hold with furniture that talks.
Posts: 1,190
Threads: 50
Joined: Oct 2017
City: Allendale, MI
What blew my mind when it went was that the eye tubes went dark just before I saw the smoke. This, I don't think, could have caused that. So I am a little concerned that something else (solder flash) is in there causing a problem. It's been playing great again for many hours now.
Posts: 330
Threads: 30
Joined: Aug 2017
City: Hay Lakes, Alberta,Canada
Oh oh!!! Let us know what you find...
Posts: 102
Threads: 14
Joined: Jul 2017
City: Bakersfield, CA
A beautiful radio and cabinet. Still looking for a cabinet for my original pointer Philharmonic from 1937. Thanks for sharing!
Posts: 1,190
Threads: 50
Joined: Oct 2017
City: Allendale, MI
I've walked past this thing in a darkened room many times and I often wonder how many children were scared stiff of these twin-eyed monsters.
Posts: 1,287
Threads: 44
Joined: Nov 2017
City: Menlo Park
State, Province, Country: CA
LOL, that is a bit menacing!
I don't hold with furniture that talks.
Users browsing this thread: 4 Guest(s)
|
Recent Posts
|
trying to identify this wire type
|
Thanks to all for the feedback. As Arran said, it is probably an older replacement and yes it has a grid cap so I will ...georgetownjohn — 09:32 PM |
trying to identify this wire type
|
It's possible that the red wire, actually a grid cap lead, is a very old replacement, I can't remember seeing a pre 1939...Arran — 09:18 PM |
Gilfillan Brothers Car Radio?
|
Hi everyone,
Special thanks to Joe Rossi for tracking down this obscure radio and thanks to others who took up the hun...Antipodal — 08:15 PM |
trying to identify this wire type
|
Here's one source for your wire of many.
Take care and BE HEALTHY! Gary
P.S. Can't get the right color you need? I ...GarySP — 06:40 PM |
trying to identify this wire type
|
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM |
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
|
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM |
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
|
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM |
trying to identify this wire type
|
The red wire is rubber covered wire.
The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM |
trying to identify this wire type
|
Greetings Phorum members,
Hope you can help me identify this type of wire in the photo I have attached. I am not sure ...georgetownjohn — 01:53 PM |
Philco 60 Squealing
|
All correct shields must be in place, all tubes correct no subs of any kind.
Check any soldered, riveted ground conne...Chas — 01:24 PM |
Who's Online
|
There are currently 2469 online users. [Complete List] » 1 Member(s) | 2468 Guest(s)
|
|
|
|