Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco push buttons for 39-31XF floor model radio
#1

Can anybody tell me where can I get the push buttons for my 31-39XF Philco? Radio Daze has push button parts numbers PB-Phil 41-W and PB-Phil-41-B, but they are for a Philco 40-180. Will they interchange? The distance from the face of the escutcheon to the beginning of the prong on my 31-39XF is approximately 3/4 inches!!

Thanks,

Jim Icon_confused:
#2

Hi Jim

I believe you mean 39-31XF, not 31-39. I took the liberty of correcting the thread title.

Radio Daze does not sell 1939 reproduction pushbuttons. Larry Bordonaro at Old-Time Replications does sell these. I've heard he has been having some health issues, though, but you should email him anyway and ask about these - and include a "get well soon" note as well!

oldtimerep AT aol DOT com

Ed "Blacksmith" at Renovated Radios also sells these. You can see them at his website:

http://www.renovatedradios.com/parts.html#pushbuttons

--
Ron Ramirez
Ferdinand IN
#3

Thanks Ron, I will check with both Larry and Ed to see who may have them in stock!!

Jim
#4

Also looking for a speaker for my Philco 39-31XF. I picked it up for $50 earlier this month. Cabinet is showroom perfect, chassis looks very clean, but it has no speaker! I read that these were first made in June 1938??

Jim
#5

Can't help you on the speaker, sorry. You need to place a "Wanted" ad for that.

Yes, the 1939 Philco model line was introduced in June 1938.

--
Ron Ramirez
Ferdinand IN
#6

Ron Ramirez Wrote:Hi Jim

I believe you mean 39-31XF, not 31-39. I took the liberty of correcting the thread title.

Radio Daze does not sell 1939 reproduction pushbuttons. Larry Bordonaro at Old-Time Repications does sell these. I've heard he has been having some health issues, though, but you should email him anyway and ask about these - and include a "get well soon" note as well!

oldtimerep AT aol DOT com

Ed "Blacksmith" at Renovated Radios also sells these. You can see them at his website:

http://www.renovatedradios.com/parts.html#pushbuttons
******************************************
@ Jim,
I have some original Philco pushbuttons I can part with. I don't know how many you need but I have 7 I'd let go for $2 each plus shipping. They are the kind listed on the "renovated" site listed above--his part # PBPh40 (W) "short." Email me at artdrhs@yahoo.com if you are interested.
Art




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>