Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 39-31 Code: 121 Parts info
#1
Rainbow 

Hi, I an new to restoring radios. I have successfully restored a Philco 39-31 code 21. To complete the job I need a few parts and I have no idea where to order or look. The parts I am looking for are;
All the Decals
one Volume knob
All the quick select buttons
and if possible the Clear plastic Bezel ( mine is really foggy)

Any help would be appreciated.
Stay well all, Heart
Garry
#2

https://www.radiodaze.com/philco-2-sets-...dcl-39-25/
http://renovatedradios.com/product.php?product=127
http://renovatedradios.com/product.php?product=211
https://dialcover.com/jmpalm/Philco_39_31.jpg

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

Terry has provided the specific links to the resources you need.
If you (or others) are looking for resources, don't forget to check in the Philco Library where there is a listing of resources:

https://philcoradio.com/library/index.ph...tegorized/
#4

Much appreciated..




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM
40-150 General questions
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM
Philco 38-7 Speaker
FYI the Impedance of the HR20 (the one I have) secondary of the audio transformer is 5 ohms. The 38-7XX speaker is suppo...tludka — 04:22 PM
Philco 38-7 Speaker
Yeah, don't use the transformer currently on the H-20 (Dopf, I thought "H20, is that new technology, a speaker usin...MrFixr55 — 03:51 PM

[-]
Who's Online
There are currently 2555 online users. [Complete List]
» 1 Member(s) | 2554 Guest(s)
Avatar

>