Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What colors were used on the Philco 16RX cabinet?
#1

I need to know the original colors so I can give it a factory finish.

I honestly dont see much contrast??

What do you guys think? There are many photos on google but here is one I think may be original.

Any help is appreciated...

Icon_smile


Attached Files Image(s)
       

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#2

>What do you guys think?

I think it doesn't have much contrast because it's been refinished. Note the PHILCO decal is facing the wrong way. Dial goes toward the user. It's too lite.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

Thats what you were talking about! I just got the reference about the decal. Darn it.... Who would purposely make it dull and boring?

Hmmmmm

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

I think it has been refinished as well. There should be toning and shading on the sides and feet at least.

Personally, I would look at sets from that year, and go with similar colours. The Philco Radio book shows it being darker, with toned feet.
#5

Here are some pictures from The Book: Sorry for the terrible iPhone pics...


Attached Files Image(s)
       
#6

Speaking of..are you sure it is RX model?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#7

Thank you for the photos. I have the feet in original condition but they are not toned like the speaker cabinet. I'll have to do some research but really it is whatever Terry wants. It's original colors are here.

I think the strips on the sides are toned as well as the 2 end speaker grills. Possibly the rim around the radio and the rim around the controls. Then the feet?

What do y'all think?

Kirk


Attached Files Image(s)
   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#8

You talked me into it here's some pics of the spkr cabinet.
Bada** ain't! Unfortunately top center section has some water damage
and will need replacement veneer. The rest is pretty good short of normal
stuff.


Attached Files Image(s)
               

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#9

You could easily glue down that ripple Terry...

I cant believe you dug it out so fast! Icon_lol

I get the color scheme now.. Are you good with it? If tomorrow is nice I want to start toning. Feet wont go on until they get toned.

Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#10

>Are you good with it?
I like the original color scheme just fine.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
AC/DC Transformer-less Sets
Fantastic report, Mr. Fixr! I had never read about AC/DC sets originally running at a higher price than AC-only models, ...jrblasde — 01:21 PM
49-504
Also wheni first power on the 7a8 gets very bright more than normal not sure what I did wrongphilco4me — 12:53 PM
49-504
Hello all I am doing a 49-504 and in section 4 I see C401is that a 5mmf ? I did not see that when I replaced the caps. ...philco4me — 12:47 PM
Looking for place to donate unique Philco Philco J-1930 Prototype
Thx for the description. I thought that it had to have a single 10 - 12" Sensor. Congrats on restoring the GE and...MrFixr55 — 10:12 AM
AC/DC Transformer-less Sets
Some of the original Edison DC generators were in use until the 1940s. The NYC subway and electrified Long Island Rail ...MrFixr55 — 09:39 AM
Samlex heavy-Duty bench supply filter question
I suggest sticking with the original values. Depending upon the design if you increase the cap values too much the incre...DaleHCook — 08:55 AM
AC/DC Transformer-less Sets
You’re welcome! I was born in 1995, so this is all second-hand information to me from the industry. I did some research ...jrblasde — 08:38 AM
Samlex heavy-Duty bench supply filter question
Hello Everyone, I have one of my Heavy-duty bench powersuplies made by Samlex it's 13.8 volt dc 20-25 amp supply. What I...radiorich — 11:24 PM
Looking for place to donate unique Philco Philco J-1930 Prototype
It's a Glaser Sears changer which Philco's engineers thought was an upgrade over a VM, but in retrospect I'd prefer the ...jeibner — 10:39 PM
AC/DC Transformer-less Sets
Joseph, Thank you for the confirmation. I knew that there must be more to the Transformer-less AC/DC radios than the ...PeterN — 10:30 PM

[-]
Who's Online
There are currently no members online.

>