Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Is the RCA 9k radio console a rarity and how many have been made?
#1

Hi to all. Please help with the information ... Recently I accidentally and in rather bad condition bought the RCA 9k radio console and I am very interested in information about the number of copies of this model and whether it is currently a rarity among collectors? Thanks for any information.
#2

I restored a 9K2 for a customer/friend about 10 years ago. That was a fine radio. It had a really nice cabinet - when refinished. AS-is, the beautiful veneers may not be very visible. If I had an extra 2 ft. of display space, I could squeeze one in (they are about 3ft. wide - I could just push extra hard).

As I recall the short-wave band went up to about 60mhz., but like many radios of the time, the osc. was only good to about 30mhz. It had a "Magic Brain" front end.

The 9K (no2) might be a little different.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#3

Thank you very much, Mr. Phlogiston, for your interesting information. Unfortunately, I got the first modification of 9k with a limited to 23 MHz band, low-power amplifier on 6F6 and a speaker system without resonators. But still, I am very happy with this purchase because the company RCA has greatly influenced the development of radio engineering in the USSR, and the desktop modification of this radio console was made almost unchanged in the USSR under the index 9H4. So it will be very interesting for me to compare these two models. Thank you again . Icon_thumbup
#4

I finally got my purchase and did an audit. The condition of the device turned out to be better than I thought.
Externally severely damaged, there are deep scratches, no 5 legs out of 6, but no fragments of veneer and therefore the restoration should not be costly and protracted.

       

In the meantime, I noticed a strange thing - at the bottom on both side walls there are mounts for the lower shelf, but the shelf was not ... Can anyone provide a photo or other information about the type and design of this shelf? Thank you .

       
#5

I cannot be sure but those could be shipping hardware and not the shelf mounts.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#6

Maybe Michael. Last night I searched the Internet for a photo of this model and did not find the bottom shelf anywhere. The lower shelf was only in more powerful versions with resonators and a 6l6 amplifier. So it seems that there should have been no regiment here.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Need to purchase some accessories for restoration of my Old Philco Radio
Here is a list of resources found in our online library that you might find useful. Mike's Gobs of Knobs email addres...klondike98 — 01:46 PM
First Radio restoration
Hi Tubeman, Welcome to the Philco Phorum.  Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM
First Radio restoration
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM
Zenith H725
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately. More ...EdHolland — 10:18 AM
Graphics for majestic 1050 dial glass.
Murf; I found this thread on the ARF, the first photo has a pretty good view of the dial glass. Regards ArranArran — 01:12 AM
Zenith H725
hello Ed, how about that speacial tape used for ducting it's like foil or how about thin piece of aluminum roof flash...radiorich — 12:19 AM
Zenith H725
Ed; One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM

[-]
Who's Online
There are currently 1596 online users. [Complete List]
» 1 Member(s) | 1595 Guest(s)
Avatar

>