Pre-war, High Tube Count Table Radios
Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
We all know of the famous Philco 16 line of cathedral and tombstone radios, but I wonder who else made high tube count table radios before the war? I have seen a big RCA or two and I think even Zenith did it for a short bit. My GE FE-112 is the first over 8 tube table radio I have seen of its style as most I see are usually tombstone style at least. So, what others have you all seen? Must be before the war and at least 10 tubes, perhaps 9 as I have seen mostly eight tubes as the cut-off for most table radios.
No matter where you go, there you are.
Posts: 4,435
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
http://www.jitterbuzz.com/indrad.html#m4688
Silvertone had some very fancy stuff, look at the 4688.....
Paul
Tubetalk1
Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
Wow, nice, big table radio from Silvertone on that page! I have one of those high ended, 14 tube Silvertones that I ran into a roadblock on and should get back to before I run out of local help on the thing. Oh, I also noticed that the writer of that page seems a little sarcastic.
No matter where you go, there you are.
Posts: 4,435
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
I have an 8 tube Silvertone table set. Weighs about 30 lbs......
http://tubetalkclassicradioshow.org/imag...6%20-2.jpg
For scale I am 6.3 and come in at about 265 lbs.
Paul
Tubetalk1
Posts: 285
Threads: 18
Joined: Nov 2016
City: Cromwell
State, Province, Country: CT
I have a GE E-101 Colorama set. This one should qualify with 10 tubes. It’s the heaviest table tombstone I have.
Tony
“People may not remember how fast you did a job, but they will remember how well you did it”
Posts: 1,531
Threads: 242
Joined: Sep 2012
City: West Bend, Wisconsin
+1 on the E-101.
I have a Zenith 12S232 Walton set that would qualify with 12 tubes
Greg V.
West Bend, WI
Member WARCI.org
Posts: 4,435
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
http://www.midwestradiomuseum.com/1239L.jpg
Here is a nice Midwest, 1939, 12 tube.
Paul
Tubetalk1
Posts: 3,150
Threads: 56
Joined: Apr 2011
City: Lexington, KY
I've got an 11 tube Pilot Super Wasp from around 1931 with two chassis (one for SW) that is a beast at over 33" wide. Shown below with my collecting buddy Terry Layman when we were bringing it home from New Jersey:
I have a large 10 tube GE cathedral J100:
I think all my other radios over 9 tubes are consoles.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
I am seeing some neat radios and learning a bit as well! Oh, I wish my late friend was still around as that Pilot Super Wasp might have very well solved a mystery from his late childhood. He recalled going to a flea market with his dad and seeing a huge table radio that looked like it was from the early 30's with two chassis, but didn't remember the name. As far as the GE Colorama, I almost bought one a few years ago.
Might as well post my GE here as getting that radio started all this in my mind. About 23.25 inches wide by 11.25 inches deep. Looks roughly the same for height, not sure about weight. 1938 General Electric FE-112
No matter where you go, there you are.
(This post was last modified: 10-12-2020, 02:52 PM by Jayce.)
Posts: 4,435
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
While not high tube count I do have some very large table models, a Stewart Warner 1946 and a RCA from 1938, easily about 24 inches across.
The larger sets do seem to play well, maybe a bit more engineering and component quality in them.
Here is a RCA 28X5 just before they stopped production for the war..............8 tubes, 9 inch speaker.
https://www.flickr.com/photos/92577012@N...ed-public/
Paul
Tubetalk1
Posts: 16,490
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
If one thinks about it, Philco 90 is a 9-tuber.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
Paul, after looking up the specs on the RCA 28X5, I definitely would not turn down a nice example if I found it for a fair price!
I never really thought about the Philco 90B as my mind was thinking slightly later, more advanced radios, but it is a 9 tube radio indeed and a fairly large table radio at that!
No matter where you go, there you are.
Posts: 157
Threads: 12
Joined: Dec 2012
City: Seattle, WA
I have a 10-tube Crosley 1055-EK in my collection. Photos of mine here:
https://www.radiomuseum.org/r/crosley_cl...055_e.html
I also have a 10-tube Zenith 10-S-130, but no photo handy.
I used to have a 10-tube RCA T10-1, but I traded it away to get a Philco 630CSX. Good trade!
I've been keeping my eyes open for a GE FE-112 almost since I started the hobby, but none has ever come my way.
(This post was last modified: 10-16-2020, 12:06 AM by palegreenthumb.)
Posts: 1,128
Threads: 45
Joined: Feb 2015
City: Roseville, MN
Tube count isn't always an indication of performance. I have two radios that have tubes that do nothing; triodes that have cathode and plate wired to ground.
Posts: 1,531
Threads: 242
Joined: Sep 2012
City: West Bend, Wisconsin
With regard to tube count alone, as these are consoles, I have my 13 tube 1937 Silvertone model 4488A sitting next to my 6 tube 1936 Zenith 6S52. Whenever I have someone visit me and ask about what the number of tubes has to do with how a radio sounds, I demonstrate these two. The Zenith has a 10 inch speaker, and the Silvertone a 12 inch. Both sound good, but for sound quality and sheer power, it's day and night. Likewise for table models, I have my 1935 Philco model 16 with 11 tubes sitting next to a 5 tube 1935 Westinghouse model WR-22 small tombstone and demonstrating those two one after another really illustrates the difference tube count (and of course speaker size) makes for performance.
Greg V.
West Bend, WI
Member WARCI.org
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Philco 46-480 Electronic Restoration
|
I’m making progress with the alignment. It was a combination of needing to solder the connection on pin 3 of the BC osci...jrblasde — 10:21 PM |
Philco 46-480 Electronic Restoration
|
Mr. Fixr
Compared to you I am sooo green behibd the ears...I have about 40 or so sets.morzh — 07:12 PM |
48-482 rear panel help
|
Many thanks to all for the responses!
No plastic button "covers" on my radio.
Ron, thanks for the chapter on...keithchip — 05:53 PM |
Philco 42-345 Restoration/Repair
|
I am back to working on this radio and managed to get a couple of radio stations to come in. But can someone help me to ...osanders0311 — 01:58 PM |
48-482 rear panel help
|
Hi Kettlechip and welcom to the Phorum.
The back panel question is interesting. I have quite a few radios that use pow...MrFixr55 — 08:24 AM |
Philco 46-480 Electronic Restoration
|
Not too much at all! :lol: Sounds like you’re just dabbling into the hobby!jrblasde — 07:56 AM |
Philco 46-480 Electronic Restoration
|
Hi Joseph,
Fortunately, Ms. Fixr does not read my computer, or she would warn you against coming to me for sanity ch...MrFixr55 — 07:27 AM |
48-482 rear panel help
|
There's a picture of one of the plastic covers in the following thread:
I bought a full set of them in 2012 or so fro...klondike98 — 11:15 PM |
Philco 46-480 Electronic Restoration
|
Good sanity check! You are correct—the first (as in, the most counterclockwise) position is for the push button presets....jrblasde — 11:05 PM |
Philco 46-480 Electronic Restoration
|
Hi Joseph,
First, verify that your band selector is in the correct position for what you want to do. I believe tha...MrFixr55 — 10:59 PM |
Who's Online
|
There are currently 918 online users. [Complete List] » 3 Member(s) | 915 Guest(s)
|
|
|

|