Pre-war, High Tube Count Table Radios
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
We all know of the famous Philco 16 line of cathedral and tombstone radios, but I wonder who else made high tube count table radios before the war? I have seen a big RCA or two and I think even Zenith did it for a short bit. My GE FE-112 is the first over 8 tube table radio I have seen of its style as most I see are usually tombstone style at least. So, what others have you all seen? Must be before the war and at least 10 tubes, perhaps 9 as I have seen mostly eight tubes as the cut-off for most table radios.
No matter where you go, there you are.
Posts: 4,381
Threads: 412
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
http://www.jitterbuzz.com/indrad.html#m4688
Silvertone had some very fancy stuff, look at the 4688.....
Paul
Tubetalk1
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
Wow, nice, big table radio from Silvertone on that page! I have one of those high ended, 14 tube Silvertones that I ran into a roadblock on and should get back to before I run out of local help on the thing. Oh, I also noticed that the writer of that page seems a little sarcastic.
No matter where you go, there you are.
Posts: 4,381
Threads: 412
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
I have an 8 tube Silvertone table set. Weighs about 30 lbs......
http://tubetalkclassicradioshow.org/imag...6%20-2.jpg
For scale I am 6.3 and come in at about 265 lbs.
Paul
Tubetalk1
Posts: 278
Threads: 19
Joined: Nov 2016
City: Cromwell
State, Province, Country: CT
I have a GE E-101 Colorama set. This one should qualify with 10 tubes. It’s the heaviest table tombstone I have.
Tony
“People may not remember how fast you did a job, but they will remember how well you did it”
Posts: 1,523
Threads: 240
Joined: Sep 2012
City: West Bend, Wisconsin
+1 on the E-101.
I have a Zenith 12S232 Walton set that would qualify with 12 tubes
Greg V.
West Bend, WI
Member WARCI.org
Posts: 4,381
Threads: 412
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
http://www.midwestradiomuseum.com/1239L.jpg
Here is a nice Midwest, 1939, 12 tube.
Paul
Tubetalk1
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
I've got an 11 tube Pilot Super Wasp from around 1931 with two chassis (one for SW) that is a beast at over 33" wide. Shown below with my collecting buddy Terry Layman when we were bringing it home from New Jersey:
I have a large 10 tube GE cathedral J100:
I think all my other radios over 9 tubes are consoles.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
I am seeing some neat radios and learning a bit as well! Oh, I wish my late friend was still around as that Pilot Super Wasp might have very well solved a mystery from his late childhood. He recalled going to a flea market with his dad and seeing a huge table radio that looked like it was from the early 30's with two chassis, but didn't remember the name. As far as the GE Colorama, I almost bought one a few years ago.
Might as well post my GE here as getting that radio started all this in my mind. About 23.25 inches wide by 11.25 inches deep. Looks roughly the same for height, not sure about weight. 1938 General Electric FE-112
No matter where you go, there you are.
(This post was last modified: 10-12-2020, 02:52 PM by Jayce.)
Posts: 4,381
Threads: 412
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
While not high tube count I do have some very large table models, a Stewart Warner 1946 and a RCA from 1938, easily about 24 inches across.
The larger sets do seem to play well, maybe a bit more engineering and component quality in them.
Here is a RCA 28X5 just before they stopped production for the war..............8 tubes, 9 inch speaker.
https://www.flickr.com/photos/92577012@N...ed-public/
Paul
Tubetalk1
Posts: 15,810
Threads: 553
Joined: Oct 2011
City: Jackson, NJ
If one thinks about it, Philco 90 is a 9-tuber.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
Paul, after looking up the specs on the RCA 28X5, I definitely would not turn down a nice example if I found it for a fair price!
I never really thought about the Philco 90B as my mind was thinking slightly later, more advanced radios, but it is a 9 tube radio indeed and a fairly large table radio at that!
No matter where you go, there you are.
Posts: 157
Threads: 12
Joined: Dec 2012
City: Seattle, WA
I have a 10-tube Crosley 1055-EK in my collection. Photos of mine here:
https://www.radiomuseum.org/r/crosley_cl...055_e.html
I also have a 10-tube Zenith 10-S-130, but no photo handy.
I used to have a 10-tube RCA T10-1, but I traded it away to get a Philco 630CSX. Good trade!
I've been keeping my eyes open for a GE FE-112 almost since I started the hobby, but none has ever come my way.
(This post was last modified: 10-16-2020, 12:06 AM by palegreenthumb.)
Posts: 988
Threads: 40
Joined: Feb 2015
City: Roseville, MN
Tube count isn't always an indication of performance. I have two radios that have tubes that do nothing; triodes that have cathode and plate wired to ground.
Posts: 1,523
Threads: 240
Joined: Sep 2012
City: West Bend, Wisconsin
With regard to tube count alone, as these are consoles, I have my 13 tube 1937 Silvertone model 4488A sitting next to my 6 tube 1936 Zenith 6S52. Whenever I have someone visit me and ask about what the number of tubes has to do with how a radio sounds, I demonstrate these two. The Zenith has a 10 inch speaker, and the Silvertone a 12 inch. Both sound good, but for sound quality and sheer power, it's day and night. Likewise for table models, I have my 1935 Philco model 16 with 11 tubes sitting next to a 5 tube 1935 Westinghouse model WR-22 small tombstone and demonstrating those two one after another really illustrates the difference tube count (and of course speaker size) makes for performance.
Greg V.
West Bend, WI
Member WARCI.org
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
12' Philco
|
If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel.
Kareem would have an e...morzh — 01:48 PM |
12' Philco
|
And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM |
Hickok AC51 tube tester
|
I think they have only shown the secondaries of the transformer.
Two of them feed the rectifiers' filaments.morzh — 12:58 PM |
IF can wire size and Rubber mounts?
|
Arran
If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM |
12' Philco
|
Rod,
Yes, I know, but the Giant Philco is not around anymore either, so I go by whoever was alive fairly recently.
H...morzh — 12:54 PM |
Hickok AC51 tube tester
|
Absolutely no one is going to reverse engineer that circuit. Even the iron core is missing.RodB — 10:37 AM |
IF can wire size and Rubber mounts?
|
Thanks to both members for your help regarding wire and tuner mtg supports. regards--Johngeorgetownjohn — 09:33 AM |
Hickok AC51 tube tester
|
Note that no power cord, power switch, or power transformer switch are shown. That (along with my experience with full s...DaleHCook — 07:09 AM |
IF can wire size and Rubber mounts?
|
A pair of wire strippers can give you an idea of what the existing gauge of the wire leads are in the IF can, I think it...Arran — 06:07 AM |
My last cabinet for this year
|
Hello Dan,
That is really beautiful what great looking radio you have !
I have friends who live in Calgary and the wea...radiorich — 01:51 AM |
Who's Online
|
There are currently no members online. |
|
|