Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Pre-war, High Tube Count Table Radios
#1

We all know of the famous Philco 16 line of cathedral and tombstone radios, but I wonder who else made high tube count table radios before the war? I have seen a big RCA or two and I think even Zenith did it for a short bit. My GE FE-112 is the first over 8 tube table radio I have seen of its style as most I see are usually tombstone style at least. So, what others have you all seen? Must be before the war and at least 10 tubes, perhaps 9 as I have seen mostly eight tubes as the cut-off for most table radios.

No matter where you go, there you are.
#2

http://www.jitterbuzz.com/indrad.html#m4688

Silvertone had some very fancy stuff, look at the 4688.....

Paul

Tubetalk1
#3

Wow, nice, big table radio from Silvertone on that page! I have one of those high ended, 14 tube Silvertones that I ran into a roadblock on and should get back to before I run out of local help on the thing. Oh, I also noticed that the writer of that page seems a little sarcastic.

No matter where you go, there you are.
#4

I have an 8 tube Silvertone table set. Weighs about 30 lbs......

http://tubetalkclassicradioshow.org/imag...6%20-2.jpg

For scale I am 6.3 and come in at about 265 lbs.

Paul

Tubetalk1
#5

I have a GE E-101 Colorama set. This one should qualify with 10 tubes. It’s the heaviest table tombstone I have.

Tony

“People may not remember how fast you did a job, but they will remember how well you did it”
#6

+1 on the E-101.

I have a Zenith 12S232 Walton set that would qualify with 12 tubes

Greg V.
West Bend, WI
Member WARCI.org
#7

http://www.midwestradiomuseum.com/1239L.jpg

Here is a nice Midwest, 1939, 12 tube.

Paul

Tubetalk1
#8

I've got an 11 tube Pilot Super Wasp from around 1931 with two chassis (one for SW) that is a beast at over 33" wide.  Shown below with my collecting buddy Terry Layman when we were bringing it home from New Jersey:

   
   

I have a large 10 tube GE cathedral J100:

   

I think all my other radios over 9 tubes are consoles.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#9

I am seeing some neat radios and learning a bit as well! Oh, I wish my late friend was still around as that Pilot Super Wasp might have very well solved a mystery from his late childhood. He recalled going to a flea market with his dad and seeing a huge table radio that looked like it was from the early 30's with two chassis, but didn't remember the name. As far as the GE Colorama, I almost bought one a few years ago.

Might as well post my GE here as getting that radio started all this in my mind. About 23.25 inches wide by 11.25 inches deep. Looks roughly the same for height, not sure about weight. 1938 General Electric FE-112

   

No matter where you go, there you are.
#10

While not high tube count I do have some very large table models, a Stewart Warner 1946 and a RCA from 1938, easily about 24 inches across.

The larger sets do seem to play well, maybe a bit more engineering and component quality in them.


Here is a RCA 28X5 just before they stopped production for the war..............8 tubes, 9 inch speaker.

https://www.flickr.com/photos/92577012@N...ed-public/

Paul

Tubetalk1
#11

If one thinks about it, Philco 90 is a 9-tuber.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#12

Paul, after looking up the specs on the RCA 28X5, I definitely would not turn down a nice example if I found it for a fair price!
I never really thought about the Philco 90B as my mind was thinking slightly later, more advanced radios, but it is a 9 tube radio indeed and a fairly large table radio at that!

No matter where you go, there you are.
#13

I have a 10-tube Crosley 1055-EK in my collection.  Photos of mine here:
https://www.radiomuseum.org/r/crosley_cl...055_e.html

I also have a 10-tube Zenith 10-S-130, but no photo handy.

I used to have a 10-tube RCA T10-1, but I traded it away to get a Philco 630CSX.  Good trade!

I've been keeping my eyes open for a GE FE-112 almost since I started the hobby, but none has ever come my way.
#14

Tube count isn't always an indication of performance. I have two radios that have tubes that do nothing; triodes that have cathode and plate wired to ground.
#15

With regard to tube count alone, as these are consoles, I have my 13 tube 1937 Silvertone model 4488A sitting next to my 6 tube 1936 Zenith 6S52. Whenever I have someone visit me and ask about what the number of tubes has to do with how a radio sounds, I demonstrate these two. The Zenith has a 10 inch speaker, and the Silvertone a 12 inch. Both sound good, but for sound quality and sheer power, it's day and night. Likewise for table models, I have my 1935 Philco model 16 with 11 tubes sitting next to a 5 tube 1935 Westinghouse model WR-22 small tombstone and demonstrating those two one after another really illustrates the difference tube count (and of course speaker size) makes for performance.

Greg V.
West Bend, WI
Member WARCI.org




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
trying to identify this wire type
Thanks to all for the feedback. As Arran said, it is probably an older replacement and yes it has a grid cap so I will ...georgetownjohn — 09:32 PM
trying to identify this wire type
It's possible that the red wire, actually a grid cap lead, is a very old replacement, I can't remember seeing a pre 1939...Arran — 09:18 PM
Gilfillan Brothers Car Radio?
Hi everyone,  Special thanks to Joe Rossi for tracking down this obscure radio and thanks to others who took up the hun...Antipodal — 08:15 PM
trying to identify this wire type
Here's one source for your wire of many. Take care and BE HEALTHY! Gary P.S. Can't get the right color you need? I ...GarySP — 06:40 PM
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM

[-]
Who's Online
There are currently no members online.

>