Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Break in? Fact or fiction?
#1

Do newly wrapped coils 'break in' or 'season' with age? I know it's a loaded question, but curious of others experiences.
#2

From the electrical point of view this is a bunch of hooey.....all these break-ins, be it cables, coils.....

Over time your bobbin could absorb moisture and stop being a good bobbin. But this is degradation and not a break in.

A well-made inductance will change a little if not at all over time. Inductance is dictated by geometry only. If you designed it so that your geometry is stable, so will be your inductor.
And even then......moisture is your main enemy. It is conductive and counters the inductance by the eddy currents appearing in the moisture mixed with chemicals.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

The basic answer?

No. There is no breakin period.

If you wrap a coil for "x" mh and you have done your job correctly, it will stay at that value until you change something about it.
#4

I can imagine very small effects.. A change in Q factor or self capacitance might result through the drying of varnish or laquer. Whether this would be noticable in anything but the most sensitive tests and applications, I doubt very much.

I don't hold with furniture that talks.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
First Radio restoration
Hi Tubeman, Welcome to the Philco Phorum.  Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM
First Radio restoration
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM
Zenith H725
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately. More ...EdHolland — 10:18 AM
Graphics for majestic 1050 dial glass.
Murf; I found this thread on the ARF, the first photo has a pretty good view of the dial glass. Regards ArranArran — 01:12 AM
Zenith H725
hello Ed, how about that speacial tape used for ducting it's like foil or how about thin piece of aluminum roof flash...radiorich — 12:19 AM
Zenith H725
Ed; One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM
The list of my radio & TV collection!
Magical chords of forgotten melodies, old nostalgic music on an old radio... Saturday night blues on the Mid-Waves on an...RadioSvit — 12:20 PM

[-]
Who's Online
There are currently 1937 online users. [Complete List]
» 2 Member(s) | 1935 Guest(s)
AvatarAvatar

>