Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

RCA phono motor question
#1

Hello everyone,
I am working on Some RCA 1950s Phono's and looking at buying some that tape used on motor windings ?
As you can see in my Photo how I used heat shrink and spliced the wire but don't really care for it
I thought why not just remove the tape and do a better job and add new tape
Sincerely Rich
#2

No photo here.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Here is that Photo everyone,


Attached Files Image(s)
   
#4

Are you asking about Friction Tape?

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#5

Hello Phlogiston,
is that what they call that special tape used on transformers and motors ?
Sincerely Rich
P.S. I did see this tape 3M 28 White Acetate Cloth Tape, 1" Width
#6

Hello Everyone,
here is a photo of the tape i was looking at !


Attached Files Image(s)
   
#7

Friction tape is black cloth tape. That looks more like masking tape which would look pretty close.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#8

Friction tape a staple of old style electric work, might be better than what was pictured. Used to use it on Hockey Stick blades.

Was a good supply at our house as dad worked at utility.

Paul

Tubetalk1
#9

Hello Phlogiston,
Well 3M™ 28 is a printable white Acetate Cloth Tape with thermosetting rubber adhesive used for electrical insulating. This tape absorbs resins and varnishes and offers excellent conformability in coil wrapping applications.
It is electrically rated for 2500volts and 221 degrees F.
#10

Cloth tape with funny smell was pretty popular in Russia.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#11

+1 Russ
I've got some yellow masking tape that looks pretty close. But would probably burst into flames and burn your house to the ground![Image: https://philcoradio.com/phorum/images/sm...wisted.gif]

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#12

This is why I read the phorum Icon_smile)
#13

Hello everyone,
thanks for all of your ideas .
sincerely Rich




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM

[-]
Who's Online
There are currently 3864 online users. [Complete List]
» 1 Member(s) | 3863 Guest(s)
Avatar

>