Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Cleaning paint from 46-420 bakelite case
#1

Hello Experts,

I'd like some suggestions for the gentle removal of paint spots from a really nice Hippo bakelite cabinet. It polished up really nicely, but at some point it got flecked with paint. I can, with great effort, clean up each fleck with a fingernail. Maybe some has a gentler method.

Thanks,

Dave
#2

Rubbing compound on a Qtip or a dental pick easy on the pressure. David
#3

My favourite paint spot tool is a razor blade scraper, the type where a hard backed safety blade slides into a holder. I always round of the corners of the blade on sandpaper so they won't catch and scratch, then hold the scraper on a shallow angle and be gentle. They usually come right off.
#4

Thanks for the suggestions. Good Deal.
#5

Bakelite is resistant to solvent paint remover but not a caustic paint remover. Some Bakelite will be O.K. with oven cleaner lye. But I would not use it.

Never clean Bakelite with Windex, 409 or other "super" household cleaners. They can remove the top surface and permanently leave the finish dull.

Mechanically removing the paint has risks...  chas

Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”
#6

if its latex house paint xylene or sold in hardware stores as "goof off" will work




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Need to purchase some accessories for restoration of my Old Philco Radio
Here is a list of resources found in our online library that you might find useful. Mike's Gobs of Knobs email addres...klondike98 — 01:46 PM
First Radio restoration
Hi Tubeman, Welcome to the Philco Phorum.  Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM
First Radio restoration
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM
Zenith H725
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately. More ...EdHolland — 10:18 AM
Graphics for majestic 1050 dial glass.
Murf; I found this thread on the ARF, the first photo has a pretty good view of the dial glass. Regards ArranArran — 01:12 AM
Zenith H725
hello Ed, how about that speacial tape used for ducting it's like foil or how about thin piece of aluminum roof flash...radiorich — 12:19 AM
Zenith H725
Ed; One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM

[-]
Who's Online
There are currently 1561 online users. [Complete List]
» 1 Member(s) | 1560 Guest(s)
Avatar

>