Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Cleaning paint from 46-420 bakelite case
#1

Hello Experts,

I'd like some suggestions for the gentle removal of paint spots from a really nice Hippo bakelite cabinet. It polished up really nicely, but at some point it got flecked with paint. I can, with great effort, clean up each fleck with a fingernail. Maybe some has a gentler method.

Thanks,

Dave
#2

Rubbing compound on a Qtip or a dental pick easy on the pressure. David
#3

My favourite paint spot tool is a razor blade scraper, the type where a hard backed safety blade slides into a holder. I always round of the corners of the blade on sandpaper so they won't catch and scratch, then hold the scraper on a shallow angle and be gentle. They usually come right off.
#4

Thanks for the suggestions. Good Deal.
#5

Bakelite is resistant to solvent paint remover but not a caustic paint remover. Some Bakelite will be O.K. with oven cleaner lye. But I would not use it.

Never clean Bakelite with Windex, 409 or other "super" household cleaners. They can remove the top surface and permanently leave the finish dull.

Mechanically removing the paint has risks...  chas

Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”
#6

if its latex house paint xylene or sold in hardware stores as "goof off" will work




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Bakelite crack repair - what is best epoxy?
JB Weld. I use the 5 minute for short gaps and 30 minute for longer ones.RodB — 08:39 PM
Bakelite crack repair - what is best epoxy?
Starting on a Philco 48-1401 Boomerang radio/phonograph.  It has one crack on the left side running from the speaker ope...de371 — 07:17 PM
Philco 89B code 123 newbie
Progress continues, finished blocks 9 and 26.  I wonder for caps 23 and 24—can I get away with 100pf instead of 110pf? ...Kurt P — 03:43 PM
Looking for place to donate unique Philco Philco J-1930 Prototype
Welcome to the Phorum, jeibner. Several of our members have connections with radio-related museums. I'm sure others wi...GarySP — 03:41 PM
Looking for place to donate unique Philco Philco J-1930 Prototype
I'm looking for a museum or other permanent home where I can donate a unique Philco prototype of a very top of the line ...jeibner — 03:15 PM
Test bench almost done...
Sweet! Yes, that's a lot of planning and work but will pay off! I built mine about 10 years ago using a radio book from ...TV MAN — 11:39 AM
1950 Emerson TV resurrection attempt
Been awhile since I've even been in the radio room. Work work work, kids graduating, going into college, and the list go...TV MAN — 10:35 AM
Philco 269 - 444 FIVE VALVE VERSION?
> So, given that this is a major refurb I don't have the time to spend on this, so happy to pass it on to someone who...Radioroslyn — 09:08 AM
Philco 269 - 444 FIVE VALVE VERSION?
Thanks for this  Hi Chas, Fix it, don't bin it! Don't sell your skills short. One step at a time and like the Home D...ChasL0001 — 01:48 AM
Philco 84 antenna connection
Have a Philco 80 my long wire is app 30 feet, for a ground in my work shop have a ground rod that is used only for radio...David — 07:47 PM

[-]
Who's Online
There are currently 3250 online users. [Complete List]
» 2 Member(s) | 3248 Guest(s)
AvatarAvatar

>