Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

model 20 dog bone resistor values
#1

I want to replace the 5 dogbone resistors. I can not find the equivelent part number/codes for these parts. I would appreciate any help you can give.
#2

Why do you need the part numbers? You can't just go down to the Philco distributor and get these anymore...

Anyway, your wish is my command:

(12) 50,000 ohms, part no. 4237
(15) 250,000 ohms, part no. 3768
(17) 500,000 ohms, part no. 3769
(18 ) 100,000 ohms, part no. 3767
(20) 500,000 ohms, part no. 3769

--
Ron Ramirez
Ferdinand IN
#3

Here's some additional info where they are listed by wattage.

http://www.philcorepairbench.com/carbonres.htm

And if yours aren't shown in the list click on the comparison pictures link. That is handy for all old dogbones, not just Philco.

You will probably have to resort to modern values like 470k instead of 500k, etc.

GL,
Bill
#4

thanks for your help. Ron, which site has these part numbers? I understand you don't sell them.
#5

You aren't going to be able to find those parts any longer more than likely. I'd recommend you get modern equivilents...

Try http://www.justradios.com : http://www.justradios.com/rescart.html

Look for ones that are as close as possible in the 1W Flame Proof column. They come in packs of 5.

50k ohm would = 47k ohm
250k = 250k
500k = 500k
100k = 100k

Brian Mattson
Coon Rapids, MN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
American Bosch Model 802 auto radio
Hello again;   I found a model 838 car radio on Nostalgia Air under United American Bosch, http://www.nostalgiaair.org/...Arran — 09:32 PM
New Philco Repair Bench
Morzh is correct. The repair bench on our website is an archived image of chuck’s original site. He no longer provides s...klondike98 — 05:32 PM
Made mistake & did not label connection
Excellent information. It is all starting to come together now and your explanation really helped since I noticed that ...georgetownjohn — 04:39 PM
Made mistake & did not label connection
Hi John, I don't have this radio, but I can supply some info: Based on your pic, pins 7,8 and 1 are used together, go...MrFixr55 — 02:02 PM
New Philco Repair Bench
As far as I know, the Repairbench does not work, and has not been working in a while. Chuck (we had that campaign looki...morzh — 01:33 PM
Radio city products 664 schematic request
Need a schematic or manual for the 664. The 663 may be similar.daveone23 — 12:38 PM
New Philco Repair Bench
Thanks Gary.dconant — 12:16 PM
New Philco Repair Bench
I tried accessing the site through our library and got the same response. It's reported to our tech gurus. GaryGarySP — 11:50 AM
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM

[-]
Who's Online
There are currently 5915 online users. [Complete List]
» 3 Member(s) | 5912 Guest(s)
AvatarAvatarAvatar

>