Is this "real" or someone's fancy design?
Posts: 5
Threads: 1
Joined: Apr 2011
Hi,
New caller whose background is mostly Zenith.
Ran across this Philco 40-158 console with fancy finish. Very professionally done. It's clean enough to be a special factory model kept in a protective bubble all these years. Or a recent repaint by someone with the expert's touch. Anyone ever hear of this design?
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Looks like the export model to MARS
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
I am willing to bet that it is someone's personal design. A little far out, but artistic in it's own right. For that reason I would say that it would be worth keeping.
Personally I would not consider creating somthing like this unless it was a way-far gone cabinet. And even then, the challenge of bringing a "rough" cabinet back to it's original appearance appeals to me.
However, you will find many what we call "franken radios" in many of our collections. They range from radios that can be directly linked to the factory to personal modifications. The personal mods are where it gets interesting. Often functional or even practical. And in some cases a little bizarre.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Welcome, Reybo.
That looks to me like someone who was high on LSD in the '60s did that to that poor radio cabinet. It sure as H**l wasn't done at the factory.
--
Ron Ramirez
Ferdinand IN
Posts: 5
Threads: 1
Joined: Apr 2011
Thanks for the info. An export version for Mars might explain the missing speaker. Thin Martian atmosphere means minimal sound waves.
This is coming up for auction in a few month. I'm thinking of buying it to take to a D.C. area swap meet over the summer. Testing the tubes adds a little value.
On another topic, does anyone recognize this AM chassis? It's in a Sonora Model B33 console, and I was told can be found in the oldest Rider volume on page 2192, which I don't have. The chassis has no name or hint of maker. The eight tubes are a CX-380, two CX-345s, a C-327, and four C-324s.
Gorgeous cabinet. The only old radio we ever had that my wife insisted we keep.
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Does Abby Sciuto want it? Could be a perfect prop for the show. Just a thought. Wouldn't blend in with my yesteryear ketch.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Please reply to the Sonora question at the following link, since the Sonora is a different subject and is not a Philco:
http://www.philcoradio.com/phorum/showth...p?tid=3168
I started a new topic on that subject there.
--
Ron Ramirez
Ferdinand IN
Posts: 5
Threads: 1
Joined: Apr 2011
codefox1 Wrote:Does Abby Sciuto want it? Could be a perfect prop for the show. Just a thought. Wouldn't blend in with my yesteryear ketch. NHOH so I looked Abby up on Wiki. Strange creature. Is that her twin who does commercials for a travel site?
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Same person. You should watch NCIS.
Posts: 5
Threads: 1
Joined: Apr 2011
codefox1 Wrote:Same person. You should watch NCIS. Never saw the cast list. My wife tunes in NCIS when I leave the room. Plot lines are too unlikely, too bizarre for me. I'm a shellfish lover trapped by the Deadliest Catch.
Posts: 15
Threads: 2
Joined: Jan 2010
reybo Wrote:codefox1 Wrote:Does Abby Sciuto want it? Could be a perfect prop for the show. Just a thought. Wouldn't blend in with my yesteryear ketch. NHOH so I looked Abby up on Wiki. Strange creature. Is that her twin who does commercials for a travel site?
Pauley Perrette is tasty.... That's a whole different subject though. I agree that would be something that would fit in with her "style".
Brian Mattson
Coon Rapids, MN
Posts: 4,703
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
reybo Wrote:Hi,
New caller whose background is mostly Zenith.
Ran across this Philco 40-158 console with fancy finish. Very professionally done. It's clean enough to be a special factory model kept in a protective bubble all these years. Or a recent repaint by someone with the expert's touch. Anyone ever hear of this design?
Yes it's called the "Book an appointment with the furniture strippers" design. It reminds me of a Rogers console, 1937 vintage, that I saw as a prop on a Canadian cable network called "YTV". Someone had taken that nice cabinet and painted it with mauve coloured "Speckle Stone" paint, it had walnut burl, Australian walnut (Oriental Walnut they called it), and several other very attractive cuts of veneer under all that mess. I hope that it found a good home, or is in safe storage, and didn't end up in the dump somewhere.
Regards
Arran
Users browsing this thread: 3 Guest(s)
|
Recent Posts
|
Shadow Meter Bulb
|
Any 6.3 volt pilot light will work. I would use the brightest one I could find in my workroom. Be sure the dial is clean...RodB — 10:45 AM |
HiFi (Chifi) tube amp build - but my own design.
|
Tim,
nice write up and thanks for sharing !!
Sincerely Richardradiorich — 02:47 AM |
HiFi (Chifi) tube amp build - but my own design.
|
Well, this was a real "Hum-Dinger" :lol: ! This will be kinda long, but hopefully it will help others having t...TV MAN — 01:55 AM |
Shadow Meter Bulb
|
Phorum members, I am trying to find the bulb # for PHILCO Shadow Meter part number 45-2180 that is from a 37-640 chassis...georgetownjohn — 06:53 PM |
Philco 41-608 changer coupler
|
3D-printing...short of machining, of course.
Or molding.morzh — 05:20 PM |
Philco 41-608 changer coupler
|
Thanks, Morzh.
That solves the issue of the rubber pieces. Now, I need to find a way to replicate the pot metal piec...alangard — 05:07 PM |
12' Philco
|
If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel.
Kareem would have an e...morzh — 01:48 PM |
12' Philco
|
And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM |
Hickok AC51 tube tester
|
I think they have only shown the secondaries of the transformer.
Two of them feed the rectifiers' filaments.morzh — 12:58 PM |
IF can wire size and Rubber mounts?
|
Arran
If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM |
Who's Online
|
There are currently 7800 online users. [Complete List] » 3 Member(s) | 7797 Guest(s)
|
|
|
|