Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Where to now?
#1

After taking a deep dive into old radio programs in the early 1970's I picked up a Philco 41-608P console. Recapped and aligned it. I replaced the original turntable with a Sony TC250  tape deck and wired it into the phono input. I was able to acquire some 7 1/2 inch reels of old radio programs through trades I made in the Indiana Radio Club. Spent many enjoyable hours listening to the programs from my youth on my old radio.
Fast forward 40-45 years, I've still got it and the tapes of the old radio programs. Still works perfectly. I still enjoy old radio programs. Meanwhile technology has marched right past me.......
Old radio programs are now available through the internet. Good ones, bad ones and some in between. I can even listen to them while driving in my car (Sirius XM and spotify)
So my question - what do I do with a fully operational 1941 Philco radio with a tape deck and a bunch of tapes of old radio programs that I've listened to many times? Is this just another artifact from the days of yesteryear? Do I just need to let go? I don't need it for AM radio (God forbid) or shortwave listening. Any ideas on how to incorporate today's availability of old time radio into an old Philco that was made the year before i was born?
#2

I honestly haven't undetstoid what you want to do. Or what the question is.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Get yourself a little iPod type audio player, download several gb of OTR broadcasts and/or podcasts from the web, wire an auxiliary input or a bluetooth receiver into the Philco and let the audio player play 24/7 on shuffle. When you want to listen, just turn on the Philco. Toss the tapes, sell them, give them away .... whatever your level of sentimentality will allow.
#4

Here's a good place to look around for shows. You can download single or whole series of a program. Old Time Radio : Free Audio : Free Download, Borrow and Streaming : Internet Archive

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#5

Hello astrotraveler,
I agree With John you can stream audio into that nice Philco I have a 1941 GE console that is exactly what I do and I also have a low power Am transmitter .
Sincerely Richard
#6

Thanks guys, this sounds like a plan. I'm going to download programs from the internet and feed it into the old radio. I also like the idea of adding a low power transmitter!




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Help with Readrite 410 tube tester
I fixed it. The filament selector switch is not that great of quality. Cleaned it and it takes some fiddling with to get...daveone23 — 06:58 AM
Looking for place to donate unique Philco Philco J-1930 Prototype
It's a vacuum tube set and it's over 60 years old.  My uncle acquired it for my parents when Philco was done with it, an...jeibner — 10:24 PM
Looking for place to donate unique Philco Philco J-1930 Prototype
Hi J Eibner, Welcome to the Phorum.  Lots of Phriendly Pholks with Phine (See a pattern here?) advice. It is very...MrFixr55 — 09:54 PM
Philco 89B code 123 newbie
Or you can do what Terry suggests. Thx Terry for remembering that. A lot cheaper. I remember an article about that, b...MrFixr55 — 09:07 PM
Philco 48-200 alignment questions
Thanks to everybody for all the info so far. RodB, thanks for the additional info. I worked on this radio years ago a...transitony — 08:40 PM
Philco 89B code 123 newbie
Now that I've been thinking about it somewhere I saw a replacement made using a section of pvc pipe and a cap to cover t...Radioroslyn — 08:25 PM
Philco 48-200 alignment questions
Terry's gimmick cap is two insulated wires twisted together about 2 inches long, one wire attaches to the generator outp...RodB — 07:46 PM
Philco 48-200 alignment questions
Hi, in this case I would be certain that pin 7, which is B-, of the 14A7 is not "hot". If it is then reverse t...RodB — 07:39 PM
Philco 48-200 alignment questions
Yup. The gimmick is to take the place of the 100mmfd cap you don't have.Radioroslyn — 07:34 PM
Philco 48-200 alignment questions
Thanks for the reply Terry. Yes I am definitely using an isolation transformer. If I work with your method and connec...transitony — 07:29 PM

[-]
Who's Online
There are currently 682 online users. [Complete List]
» 1 Member(s) | 681 Guest(s)
Avatar

>