Philco 610, 620, 630 Tombstone?
Posts: 5
Threads: 1
Joined: Jan 2022
City: Smithtown
State, Province, Country: NY
Hello all. Can someone tell me if the PHILCO 610 620 & 630 tombstone cabinets use the same chassis? I shipped a Philco 610 to my daughter via UPS in beautiful condition, packed it right, put FRAGILE stickers on the box etc; & it arrived with the cabinet crushed. The chassis is in good shape so looking for a cabinet that it will fit in without modifying it. I realize that the mount for a speaker might be a bit different, but not my concern right now as long as the chassis volume, band, dial controls, dial window etc, line up with the holes in the cabinet. If these models will take the chassis, are there any other models that will? THANKS! Joe
Posts: 1,958
Threads: 146
Joined: Jan 2013
City: Westland, MI
Welcome to the Phorum! As a new member the first posts you make are approved before posting by our moderator team. Once you post a thread it may take a little time before one of us logs in and are made aware of your post. If there are any possibilities for a cabinet substitution these folks will help. Take care and BE HEALTHY! Gary
"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
Posts: 5
Threads: 1
Joined: Jan 2022
City: Smithtown
State, Province, Country: NY
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Hi,
Sorry to hear about your 610 cabinet getting damaged. You didn't mention whether it was a tombstone, table model, or console.
Some hints on shipping:
* Always overpack. Allow room for at least two inches of packing material to completely surround the radio. Pack it tightly so it cannot move around inside.
* Pack in such a manner that it can survive being dropped to a concrete floor from a height of 6 feet. UPS packages are routinely subject to such extreme treatment.
* FRAGILE stickers are useless. Shippers pay no attention to them.
That said, yes, there are differences between the 610, 620, and 630 chassis. However, the overall size of the three is about the same, so you should be able to install a 610 chassis into the following cabinets:
610B, 610T, 611B, 611T, 620B, 623B, 625B, 642B.
It will likely fit a 630B as well but be aware the 630 escutcheon is larger and made for use with a shadowmeter, which the 610 and 620 do not have.
Of these cabinets, the easiest to find will likely be a 620B, followed by a 610T, 623B and 610B.
If you are not familiar with these models, look at them in the Philco Gallery. Link 1 Link 2
Another thing to consider: The 610B uses a small (5 inch) speaker while the 610T, 620B & 625B use 8 inch speakers.
I once installed a 630B chassis (with shadowmeter removed) into a 610T cabinet, so I know the chassis sizes are similar.
--
Ron Ramirez
Ferdinand IN
Posts: 5
Threads: 1
Joined: Jan 2022
City: Smithtown
State, Province, Country: NY
Thank you Ron! Great information!
Posts: 5
Threads: 1
Joined: Jan 2022
City: Smithtown
State, Province, Country: NY
Follow up Ron. It's a tombstone. Thanks
Posts: 1,402
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
Posts: 4,378
Threads: 411
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
The Catman, well you know if you need it you need it. I have bumped into many of his offerings on ebay while searching.
Paul
Tubetalk1
Posts: 15,705
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Oh, the Catman dismembered another radio....
Gee, if Kirk doesn't fix my cabinet, I will need one too. My 620's been waiting for like 5 years now.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 4,108
Threads: 310
Joined: Nov 2013
City: Kings Park NY
5 measly years Mike?
You will have it this spring... Unless someone else gets sick.
So will Sam and Terry.
You wont even recognize it! (Mostly because its been 5 years)
Kirk
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 337
Threads: 13
Joined: Apr 2019
City: Greenwood
State, Province, Country: Delaware
I that was wine, would just be getting better with age- just saying
Simon
Posts: 15,705
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Simon
It just might, it just might.....however, myself, I do not get better with age. Just older, stinkier and crankier.
I am just trying to arrange the meeting of the cabinet and myself before one of us will have decomposed.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 01-22-2022, 05:10 PM by morzh.)
Posts: 4,108
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 5
Threads: 1
Joined: Jan 2022
City: Smithtown
State, Province, Country: NY
Found a 611 cabinet in good shape on EBAY. Thanks for everyone's help.
Posts: 1,958
Threads: 146
Joined: Jan 2013
City: Westland, MI
Glad you found a cabinet for your chassis. Don't be a stranger. Take care and BE HEALTHY! Gary
"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Model 96 cabinet veneer
|
There is some description of the veneers in the 1930 Brochure in our library. Here's the link:
klondike98 — 11:59 PM |
Philco 91 Speaker Replacement
|
I can't remember, but there was a particular product for loosening glue on the more modern "spiders", used pos...MrFixr55 — 09:43 PM |
Philco 91 Speaker Replacement
|
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM |
Restoring Philco 37-604C
|
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one.
Which does not m...morzh — 01:44 PM |
Philco 38-2 Automatic Tuning
|
When you push the lever, you are supposed to rotate the disk to the desired station.
Then the magnetic tuning will acqu...morzh — 01:42 PM |
Philco 38-2 Automatic Tuning
|
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM |
Philco 91 Speaker Replacement
|
How would I go about removing the spider from the cone?dconant — 12:04 PM |
Philco 38-2 Automatic Tuning
|
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM |
Does anyone make photofinish replacements?
|
Here’s the link to the DIY photofinish section of our site:
klondike98 — 09:46 AM |
Delco car radio Peko vibrator converstion issues
|
Hi Richard,
Thx for posting the schematic. As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM |
Who's Online
|
There are currently 1055 online users. [Complete List] » 2 Member(s) | 1053 Guest(s)
|
|
|
|