Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Stromberg-Carlson Dynatomic
#1

You could say this radio is an example of the third time is the charm as I have had three of these now and might still have a 1500H in storage. The first one was intact, but had the melted earlier dial and was sun bleached, so my late friend took it for parts. The second one had some damage to the back and both antenna wires broke off the chassis. This one is fully intact, has a new cord, and is working.
I almost had a spoke too soon moment yesterday as I played it for an hour after posting about it along with my other Phinds in the Phinds thread. It suddenly just faded out and shut down and it turned out the 50L6 had burnt out. Actually, four of the five tubes including that on were factore originals and all were getting weak, which is surprising considering how well the radio was working. The one replacement 12AT6 was also not good and looked like it was used when put in so I opted to just retube the whole radio with much better and cleaner tubes. I even opted to replace the dial lamp as it took a major jolt when I shut radio off and turned it back on at first to make sure it wasn't the power switch. Like a flash bulb! After that, I ran this radio for four hours solid last night with no issue and am listening to it now. I am assuming it has been recapped, but some examples on the other forum are still running fine on original parts as it seems Stromberg must have used good stuff in this series of radios. I guess you can even take the IF cans apart and clean them as most are clipped together. From the tube line up (still using the 12AT6) and the curved dial scale, mine appears to be a 1400 model. The tag on mine is gone and it also seems the broken dial pointer is a common issue with an otherwise nice radio. Basically, this is a six tube set (selenium rectifier) and I was surprised to see it has a full three gang tuner in there.

   

No matter where you go, there you are.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
My last cabinet for this year
They are a nice looking radio, Stromberg. I have a small tabletop octagon-dial one. It sounds surprisingly nice. And t...morzh — 09:40 PM
Philco 41-608 changer coupler
Different years but the same idea.morzh — 09:38 PM
My last cabinet for this year
That’s a beauty! :thumbup:klondike98 — 09:24 PM
Philco 41-608 changer coupler
Hi Morzh, I've searched using Mondial as the user name with various keywords such as 'coupler', 'motor', 'idler', 'p...alangard — 08:31 PM
Philco 16B Parts
I think the chassis is painted.morzh — 08:13 PM
Philco 38-2 Automatic Tuning
Honestrly, the original is quite acceptable and, it seems to me, can be cleaned.morzh — 08:11 PM
Philco 41-608 changer coupler
Mondial left a thread about remanufacturing thois type coupler.morzh — 08:09 PM
IF can wire size and Rubber mounts?
Are you talking about rewinding or rewiring? For rewiring, meaning runnin wires to the coil from other components, the ...morzh — 08:08 PM
12' Philco
I wonder who would be able to "no stoop" with this one.morzh — 08:05 PM
IF can wire size and Rubber mounts?
Hello PHORUM members, I am still working on restoration of my PHILCO 37-640.  I want to start with rewiring the IF ca...georgetownjohn — 06:32 PM

[-]
Who's Online
There are currently 3250 online users. [Complete List]
» 1 Member(s) | 3249 Guest(s)
Avatar

>