Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

PHilco 44
#1

Hello my ingles is bad, sorry i'm spanish.
i look for pictures of Philco 44, box and chassis, because i need this picture for restoration of my radio.
i think that is one radio Philco 44, is there some box this model ?
thank you, Mauricio
#2

Here is a picture of the 1934 Model 44 Philco:

[Image: http://radioatticarchives.com/images/p/P..._KBoyd.jpg]
#3

is there other box of model Philco 44 ??
because if you put philco 44, is this the model Philco 44 ????

http://www.wjoe.com/philco441.jpg
#4

This picture above is the Model 44B, which means the Baby Grand cathedral cabinet.

The Model 44 also came in the High Boy cabinet as
the Model 44H

[Image: http://www.philcorepairbench.com/images/44H.jpg]


and the console version Model 44X. The X stands for an inclined speaker sound board.


[Image: http://www.philcorepairbench.com/images/44X.jpg]
#5

hello again, have you pictures of chassis philco 44b
one cuestions have the philco 34 the same box that philco 44B
thank you, Mauricio
#6

No pictures of the Model 44 chassis, only the pictures above.

The Model 34 came in different cabinets - see below.

The Baby Grand case is a flat front with no raised moulding like the 44.


[Image: http://www.philcorepairbench.com/images/34B.jpg]


[Image: http://www.philcorepairbench.com/images/34L.jpg]
#7

thank you,, have you any pictures of chassis 34b ?
because i have one radio, i think that is is 34b o 44b, but i don´t
#8

No, sorry, no pictures of chassis'.

But you can use the TUBE MANUAL section of my website to help identify the chassis you have. Use the tube socket layout diagrams there to see what matches the tubes and locations on the chassis.
#9

Mauricio
Email me at lawnweeds100@yahoo.com and I will send picture of Philco 44 Chassis; it uses 110 volts AC, 2 prong plug. A Model 34 will not have a power transformer and will have a battery cable. -Pedro alias-

Pete AI2V




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM
Made mistake & did not label connection
You'll have to forgive me, I am not sure what you mean.  Can you explain what you are really saying.  If anyone does not...georgetownjohn — 08:05 PM
Made mistake & did not label connection
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM
Made mistake & did not label connection
Maybe this is starting to make some sense in my hard head.  Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM
Made mistake & did not label connection
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM
Made mistake & did not label connection
What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM
Made mistake & did not label connection
Hello John, I have been there either label got lost or was not labeled ! Sincerely Richardradiorich — 02:15 PM
Made mistake & did not label connection
Sorry, it is a Philco 37-640.  Does that help?--Johngeorgetownjohn — 02:14 PM

[-]
Who's Online
There are currently no members online.

>