Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 610
#61

So I have sent off my speaker from the 610 to get reconed and while I am waiting for it to return I have managed to borrow a tv-11 tube tester. I have a tube chart the owner printed out and on the info for the type 78 tube there is a t.c. under the p column. In the paperwork I can't find what this means. Anybody know what this means? Thx


Attached Files
.pdf 2022-05-05-023511.pdf Size: 653.59 KB  Downloads: 109
#62

I would think it means top cap. This is the control grid connection for the 78 tube. Other tubes in the list with a top cap grid connection show the same T.C. in the P column.
#63

I got ya. So they are saying to connect it with the wire supplied. Makes sense . Thx.
#64

Hello Jim,
That is correct anyway I am glad you are coming along on your restoration I really enjoy my Philco 610 it really is a nice set .

Sincerely Richard
#65

So I got my speaker back from getting it reconed and boy does it make a difference. This radio rocks. I got this thing trimmed and it its receiving ability has improved greatly. Now to start on the cabinet! Thx for all the help.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Hippo 46-420 Schematic doesn't match parts list.
Here you have the part in the sch with values. I am not sure what else is needed.morzh — 02:56 PM
Restoring Philco 37-604C
Ron Here are the two of my jigs side by side. They have been with me about the same time (a couple of month differenc...morzh — 02:05 PM
Kurt P
Terry, gotcha, thanks for the clarification.  That’s probably why the speaker seems shorted.  Assuming the OT/FC/speaker...Kurt P — 10:59 AM
Radiola 18 Amplifier & PS
I have the 2.25V and 2.5V information confused, and must look more carefully at the schematic and Hammond transformer in...TN Allen — 10:24 AM
Radiola 18 Amplifier & PS
Thank you for the information, it all helps, although understanding some of it takes time. One reason for doing the PS a...TN Allen — 09:42 AM
462ron
Hi Mike, the radio is coming along nicely but wow, you must have some serious moisture in your shop judging by the amoun...462ron — 06:29 AM
Restoring Philco 37-604C
Have rebuilt the can. The can had 4 caps in it, 2x16uF, 10uF and 8uF. I used a 15uF as the first cap, 22uF and 10uF ...morzh — 09:38 PM
Philco 89B code 123 newbie
The flat copper wires are from the hum bucking coil. All of the other resistances seem to be OK.Radioroslyn — 04:15 PM
Help with weston 669
I need help with my 669 meter. I recapped it becausing it was pegging the meter out. Now the neon light comes on (not su...daveone23 — 02:42 PM
Philco 89B code 123 newbie
I may be incorrect but you should measure around few ohms for the voice coil. In addition you may have a hum bucking coi...RodB — 02:29 PM

[-]
Who's Online
There are currently 3388 online users. [Complete List]
» 2 Member(s) | 3386 Guest(s)
AvatarAvatar

>