Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Q1715 Stereo/Record Player Cabinet Asbestos???
#1

I got a Q1715 cabinet from an estate sale a few months ago. I was going to clean it out and noticed this black stuff inside where the records would be placed. It is soft to the touch and very flakey. I am not sure of they put asbestos there but I can't tell if it is just old foam or what. The cabinet is from 1967.
#2

Welcome to the Phorum!
Icon_wave

I don’t think there would be any reason to put an asbestos sheet in the record storage area and asbestos that I’ve come across in older radios was all a white color. Foam of that vintage almost certainly has degraded by now. Nevertheless whatever it is would best not be inhaled. Wear an N95 or KN95 mask, moisten the area with water spray to keep dust down, and put it into the trash.
#3

Welcome to the Phorum! Years ago I used to work in Environmental Remediation for a testing laboratory. I have never seen black asbestos, unless it was painted. To be totally safe, mist it with water lightly to keep down dust. Use a mask, vinyl gloves, and place it in a zip-type plastic bag. Dispose it in regular trash. Take care and BE HEALTHY! Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
#4

The best way is to photograph the stuff and show it here.

I do not think people painted asbestos, and there is no black asbestos.

But the photo would help.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#5

Quote:...noticed this black stuff inside where the records would be placed. It is soft to the touch and very flakey.

Felt to protect records from chipping, decomposed over time. Shop Joanna fabrics for an equivalent, Icon_confused  may not be black. Pool table green or deep maroon is always nice...

Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”
#6

Hello Chas,
Yes Felt I bet that is what he is talking about !
#7

I might add...

We, as in I, would, use a solvent adhesive to stick new felt down.

I really do not know of an alternative maybe PVA?

Therein, any solvent fumes near shellac of any plastic record can cause a permanent haze to the surface but can etch into the grooves and create noise.

So air out the cabinet most thoroughly or find some other non-solvent adhesive.

I recall as a young lad having a 45 copy of "Smoky Places", it cracked, so I though that a drop of Duco Cement at the very perimeter would keep the split from traveling, it did but around the drop of cement an area of haze developed and into the actual recording. When played the record has a hiss in that area.

I never found another copy of Smokey Places to replace it, I still have it to this day, somewhere... As reminder...

Chas

Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM

[-]
Who's Online
There are currently 1059 online users. [Complete List]
» 2 Member(s) | 1057 Guest(s)
AvatarAvatar

>