Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Well I been away to long
Decided to work on my 41-608 122
It worked before I changed caps
Even after I changed electorlyitics
Now I changed paper caps But not the 1000 volt caps now nothing dead At my Veriac 120 v
But at block and on off switch has 7v. Even if I jump switch out
Thanks sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
If you don't have it at the switch. Check your cord and plug. That set is a little odd as the switch is before the block most are after.
https://philcoradio.com/library/download...20Book.pdf
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
(This post was last modified: 08-17-2022, 09:17 PM by
Radioroslyn.)
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Thanks Terry
Plug was not making good contact in my veriac
Plugged it in wall now working
Thanks sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
HI SAM!
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 5,129
Threads: 271
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
HI Sam
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
