Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

SC and Philco from CL
#1

$40 got me this clean working 1939 SC 430H nine tuber along with the innards of a Philco 630 and a suitcase full of pulls. No 45s but four 80s and a 99 so far. Can anyone tell if the 630, code 121 is a '35 or '36?
[Image: http://i150.photobucket.com/albums/s92/u...0_0778.jpg]

[Image: http://i150.photobucket.com/albums/s92/u...0_0780.jpg]

Phil aka Philbert Q. Desenex - Twin Cities, MN
#2

Sounds like a good haul to me, even if there are no 45's. Icon_thumbup There's got to be a chest full of 45's out there somewhere. Thar be good booty if one of us find it. Ar! Icon_lol

No matter where you go, there you are.
#3

The 630 is a 1936 model, introduced June 1935 as a 1936 model; and it looks like this is what you have, the remains of a 630X console.

Congratulations on your finds!

--
Ron Ramirez
Ferdinand IN
#4

Thanks Ron. I wish they had made the oval lens for a longer period. IMO it looks better than the later round ones.
Oh well, I do like them all.

Phil aka Philbert Q. Desenex - Twin Cities, MN
#5

Nice job!! I've got my eye on a model 645 that's at local and is at a second hand store. At the end of the month everything goes for 1/2 price. Makes it a good deal then. Like I need another radio. Your dial on the SC looks just like the one on the console set I had back in the '60s
Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT-6 antenna connections
Hi Bridcarl +1 on the others.  Pin 6 of the 7C6 is the AVC Diode so it is appropriate that that pin 4 of the coil con...MrFixr55 — 07:30 AM
462ron
Joseph, this is beyond awesome. A lot of thought and engineering went into this and you hit a home run! Now I must save ...462ron — 07:27 AM
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM

[-]
Who's Online
There are currently no members online.

>