Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

New Project: 1934 Colonial 662 (corrected model)
#16

Lots of work on this set this weekend. First off, to diagnose the oscillator problem. I replaced all the paper caps, and the suspect 50k resistor, and the paper caps. Still no stations, and now there was an LF instability in the whole set as soon as the tuning cap was more than half open, with the set blowing raspberries from the speaker. At the end of the day, I returned to checking wiring and component values from the schematic, and found a broken wire from the converter tube grid circuit to the oscillator section of the tuning cap. OK, something to go on, and a good end to the day.

Today I removed the tuning cap, which was needed anyway, to replace the rubber bushings. I punched these out of some silicone foam, and added new wires to the cap #28 enameled wire, with cloth insulation slipped over it was a close match to the original. With this, I finally had some reception, but still a very unstable receiver. Whistles on stations up to about 100 on the dial, after that raspberries from the speaker, on either band. Eventually I tracked this to a bad solder joint connecting one of my restuffed caps. With that restored, I was able to align the radio and it really pulls in stations. Icon_smile

Pics tomorrow,

Ed

I don't hold with furniture that talks.
#17

A few pics Icon_smile

Fine wires leading to the tuning capacitor stators. Notice the osc section on the left has a broken connection. These had so little spare that the breakage was probably due to the additional movement due to the perished rubber mounting grommets:

   

New grommets cur from silicone foam rubber:

   

Tuning cap with new wiring, ready for reinstallation. 

   

Playing some music

   

I don't hold with furniture that talks.
#18

Nice and clean! Looks GR8!!

"Do Justly, love Mercy and walk humbly with your God"- Micah 6:8
Best Regards, 

MrFixr55
#19

This weekend. I found time to restuff the two electrolytic cans. All is still working nicely. The chassis is waiting for a new line cord, still to be delivered, and will get new antenna and earth leads before returning to the cabinet.

Ed

I don't hold with furniture that talks.
#20

Looking great!
Icon_clap
#21

Another one over the finish line. I'm pleased with it and particularly enjoyed working on this radio for some reason I cannot quire explain.

   

I don't hold with furniture that talks.
#22

Cute set.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#23

Hello Ed,
Nice little set !

Sincerely Richard
#24

Great job! Ed Icon_clap
#25

Thanks everyone. I appreciate the kind words.

I don't hold with furniture that talks.
#26

She is a beaut. Nice size, maybe I could sneak one that in unoticed!

I think Colonial made a lot of stuff for SEARS if its the same Colonial I am familiar with.

Enjoy.

Paul B

Tubetalk1
#27

Hello Paul,
Yes it is the same company and I own a bunch of sears radios made by them also Arvin .

Sincerely Richard
#28

I like that mantle style, thanks for confirming Rich.

Paul




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Hi Cap'n Clock, Unfortunately, I do not have this radio.  This is a shame because this should be a good performer.  2A5...MrFixr55 — 06:48 AM
American Bosch Model 802 auto radio
I think it would come under either American Bosch or United American Bosch. American Bosch made sets for the American We...Arran — 05:53 AM
trying to identify this wire type
Thanks to all for the feedback. As Arran said, it is probably an older replacement and yes it has a grid cap so I will ...georgetownjohn — 09:32 PM
trying to identify this wire type
It's possible that the red wire, actually a grid cap lead, is a very old replacement, I can't remember seeing a pre 1939...Arran — 09:18 PM
Gilfillan Brothers Car Radio?
Hi everyone,  Special thanks to Joe Rossi for tracking down this obscure radio and thanks to others who took up the hun...Antipodal — 08:15 PM
trying to identify this wire type
Here's one source for your wire of many. Take care and BE HEALTHY! Gary P.S. Can't get the right color you need? I ...GarySP — 06:40 PM
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM

[-]
Who's Online
There are currently 5805 online users. [Complete List]
» 4 Member(s) | 5801 Guest(s)
AvatarAvatarAvatarAvatar

>