Posts: 16,579
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Some time in 2023 I acquired an RCA140, with the cabinet in pretty damaged shape.
So during the last Kutztown Joe Koester kindly took the cabinegt to TX, to Fred Taylor.
Fred did really superb job on it. He also said there was more damage to the cabinet that I thought there was.
It came today.
The photos do not do it justice as the lighting is not powerful enough to get the finish to really show up, so I will show what the cam could see at that soft light.
Oh, and it was packed to withstand ISTA drop test plus some elephants trampling on top of it after having overindulged on coffee plant's fruit.
Here are some photos.
First packaging. Double-boxing, done properly, with 1' shipping styrofoam and 2.5" filling on the sides between the boxes, the cabinet wrapped in shippingf blanket.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 16,579
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 4,515
Threads: 425
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Fred does beautiful work, and is a nice man.
Let us see the case!
Paul
Tubetalk1
Posts: 1,941
Threads: 129
Joined: May 2008
City: Omak
State, Province, Country: WA
Hello morzh,
yes, fred does amazing work I have a Zenith 908 cabinet that I have been wanting to send .
Sincerely Richard
Posts: 16,579
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Posts: 3,156
Threads: 56
Joined: Apr 2011
City: Lexington, KY
The cabinet looks great Mike! Fred is an artist in wood. He has done a couple of cabinets for me and they turned out beautiful. I drove out to Dallas and picked one up, a console cabinet, and had the pleasure of meeting him in person.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 16,579
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
John
He's an artist for sure.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 289
Threads: 42
Joined: Jan 2014
City: Jeffersonville
State, Province, Country: PA
Does anyone have Fred Taylor's contact information?
Thanks
Paul
Posts: 16,579
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I first contacted him on Facebook.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 3,156
Threads: 56
Joined: Apr 2011
City: Lexington, KY
Paul, check your PMs....
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 16,579
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Paul, check the PM. I asked Fred, so his info will be in the pM.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 289
Threads: 42
Joined: Jan 2014
City: Jeffersonville
State, Province, Country: PA
Thanks very much for your help fellas!
Paul
Posts: 4,515
Threads: 425
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Posts: 145
Threads: 29
Joined: Dec 2016
City: portland, OR
Beyond impressive, morzh. Any chance you have a before picture?
Posts: 16,579
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Users browsing this thread:
|
|
Recent Posts
|
|
Philco 42-345 Restoration/Repair
|
| The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM |
|
Philco 42-345 Restoration/Repair
|
| What does the resistor measure? I think it should be 3.3 Meg.
If the oscillator coil has continuity and the resistanc...RodB — 09:03 PM |
|
Philco Model 38-7: what caps & resistors do fail typically?
|
| Good idea to check the coils... then I'll get hold of an incadescent light bulb and see what happens when the unit is sw...Musaeum — 08:49 PM |
|
Philco 42-345 Restoration/Repair
|
| I have that same set, ain't too much shortwave I like anyway.....it is a good AM DX set. PaulPaul Philco322 — 08:32 PM |
|
Philco Model 38-7: what caps & resistors do fail typically?
|
| Welcome to the Phorum, Martin! Open a new thread in Philco Electronic Restoration when you begin working on your 38-7. ...GarySP — 08:28 PM |
|
Philco Model 38-7: what caps & resistors do fail typically?
|
| Welcome to the Phorum!
:wave:
Here's the schematic for that radio from our digital library:
Something to do bef...klondike98 — 08:05 PM |
|
Philco Model 38-7: what caps & resistors do fail typically?
|
| Hi all,
on vacation in Montreal, a friend of mine showed me a Philco Model 38-7 console radio from the 30ies. Mechan...Musaeum — 07:21 PM |
|
Part numbers to model cross
|
| I looked thru the documents and did not see one. Might have missed it though.Jim Dutridge — 07:16 PM |
|
Philco 42-345 Restoration/Repair
|
| Please tell me this was it, I replaced resistor 27 and it's playing on the broadcast band. I am afraid to change the ban...osanders0311 — 06:12 PM |
|
Philco 42-345 Restoration/Repair
|
| So far still no broadcast, I am posting pictures of #14 Oscillator and also a resistor #27 which connects to an XXL tube...osanders0311 — 04:02 PM |
|
Who's Online
|
There are currently 1020 online users. [Complete List]
» 3 Member(s) | 1017 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
