Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Back Panel labels for Philco, PT-49
#1

I have a Philco ,model PT-49 that I am restoring. I recently purchased a back panel for it and I wanted to find a way to purchase or reproduce the Service, Your Guarantee of Safety and the UL Stickers. I have not been able to find these stickers on line in which they could be downloaded and printed. The other issue is knowing the dimensions of the stickers. I only have a basic ink jet printer and I was thinking that I would have to go to a place like Staples or a print shop to have the stickers made up. I have never done this before and any help will be greatly appreciated.
#2

Welcome to the Phorum!
Icon_wave

Unfortunately I don't see any labels that you are looking for in our Documents library but hopefully someone here will have some on their radios and can scan the back for you to print them. I have a UL sticker on a 49-506 (a slightly different vintage and look but still similar in size probably) that is 14 mm in diameter.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit.  That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Well...a chassis is metal. Magnetic or not, it does not matter. A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM
Hickok AC51 tube tester
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM

[-]
Who's Online
There are currently 4982 online users. [Complete List]
» 2 Member(s) | 4980 Guest(s)
AvatarAvatar

>