Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 39-116
#1

First let me say I've been a lurker her for awhile and this is my first post. Ron, Chuck, and the rest of you have helped me more than you'll ever know and I want to thank you.

I've been into this radio restoration thing for about a year now, all table models, with very good results. Ran across my first console, a 39-116 and was able to pick it up for 45 bucks.
It needs some veneer work, but the electrical looks complete and in very good shape. No magic remote, didn't know there was such a thing until researching after the buy.
Needless to say I'm am all beside myself.

What I want to ask is, although I've been an industrial electrician; automation and PLC's, for about 12 years, all this tube and RF technology is still new to me. I want to dig right in but maybe I should wait and try to learn more. What do you guys think? Also what do you think my chances are of acquiring a magic remote? I've been toying with the idea of building a modern version. What are your thoughts?

Thanks again for all your help.
#2

Hi and welcome! I placed your post in a new thread of its own since it is unrelated to the 1936 model 116B.

Thank you for the kind words! Glad you're aboard.

$45 is a good price for a 39-116. You shouldn't have too much trouble finding a Mystery Control remote for your 39-116. They show up on eBay quite frequently.

If you are unfamiliar with tube technology, I suggest you take some time to educate yourself on the subject. There are a few books available about tube radio restoration. You can also find info online. You can find some good pages, written with the beginner in mind, here:

http://www.antiqueradio.org/begin.htm

Building a modern version of a Mystery Control could be an interesting (if non-original) project. Here's a page you may enjoy viewing, which gives more info on the Mystery Control remote itself:

http://radiodemo.110mb.com/

--
Ron Ramirez
Ferdinand IN
#3

If you can solder/unsolder, use a VOM, and read a circuit diagram you can probably restore the set. The "Mystery Control" works by a pulse system similar to a rotary dial telephone except that it uses a radio transmitter instead of wires. You could build a home brew version just as an exercise but I don't think that the 1939-41 remote boxes are that hard to find since the radios always originally came with them and they are all the same. The early remotes that are harder to find are the wired ones that RCA and a few other companies offered as an extra cost accessory like for an 811K, but the Philco Mystery control sets always included the remote from the factory.
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently 1997 online users. [Complete List]
» 1 Member(s) | 1996 Guest(s)
Avatar

>