Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

RCA WV-98c
#1

I have a wv98c and it looks like the meter is roached. Needle wont move. I applied a small voltage thru a pot and resistor and it wont move. Can the movement be taken apart?


Attached Files Image(s)
   
#2

Your power supply's ammeter is, obviously, coarse and might not see a small current.
Put an ammeter in series, and see if any current at all flows. If not, there is an open somewhere, possibly inside the meter.
Many old ones could be taken apart, but I am not familiar with this one. See if tehre are screws holding things together.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

I balanced the movement. Micro surgery. Like working on a watch. While iam in the machine should i replace these brown caps?

https://www.dropbox.com/scl/fi/1lrg7d1dz...g39h7&dl=0


Attached Files Image(s)
   
#4

Think yes.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#5

To fix the movement properly you need to glue the magnet to the bracket. They used junkie glue from the factory.


Attached Files Image(s)
   
#6

So i put it back together, replaced the only electrolytic cap, the ohms feature works but on DC + volts, it pegs the meter to the right. Any thoughts?


Attached Files Image(s)
   
.pdf wv98c_sch.pdf Size: 153.27 KB  Downloads: 15
#7

Check the schematic.
And the idea is pretty simple: if you peg it to the right, you put too much current through it.
Work from there.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#8

I will check out resistors R23, R27 and R28.
#9

I only see one R23 resistor. The schematic shows two.


Attached Files Image(s)
   
#10

Can you put PDF of the sch here, or the link to it?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#11

Here is the schematic


Attached Files Image(s)
   
#12

Are there any paper capacitors, or only disc ceramic ones?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#13

Disc and polys.
#14

Can you highlight the circuit that is set by switches and leads when it measures DC volts?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#15

Thats the hard part and what i need. .5 thru 15vdc i cant get the pot to zero the meter. Higher voltages are ok




Users browsing this thread: 14 Guest(s)
[-]
Recent Posts
Philco 37-S650X Face lift
Hello Stanley, that looks great !! Hey if you want you can come over to my house and restore my cabinet for my General...radiorich — 11:33 PM
Philco 37-S650X Face lift
I finished a facelift on this radio and I think it turned out pretty well.   It had at least 4 different woods on it....Stanleyii — 10:46 PM
Philco 37-2650X Face Lift
Yep, that would be a better place for it. Didn't know there was a category there. Is there a way to move it out just s...Stanleyii — 10:34 PM
Philco 37-2650X Face Lift
Excellent job! Would be a bit better to place the topic to the "Cabinet Restoration" section.morzh — 10:14 PM
Model 96 cabinet veneer
I am almost positive it is white or light walnut. Then stained or toned to the proper color. Dickmadsowry — 09:58 PM
[split] Newbie questions RE: Philco 41-608
Does the cap pair #61 (input filter) have its centerpoint to teh chassis? Actually, has the radio been fully re-cappe...morzh — 09:51 PM
[split] Newbie questions RE: Philco 41-608
Gary Thank you. Toddtmurphy — 09:14 PM
[split] Newbie questions RE: Philco 41-608
I agree with Morzh. I've split this issue to it's own thread. Take care and BE HEALTHY! GaryGarySP — 09:03 PM
Newbie questions RE: Philco 41-608
John Thank you for the detailed response. I checked my connection again based on the schematic and your suggestions....tmurphy — 08:42 PM
Philco 38-2 Low Volume
Hi MrFixr55, The aux sound was good and yes it can be made too loud. The tone has no real effect on volume just tone, ge...dconant — 06:04 PM

[-]
Who's Online
There are currently no members online.

>