Posts: 15,817
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
strange. It should have more even to the GND, and the GND is 1M to the case.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 95
Threads: 19
Joined: Jun 2024
City: tampa
State, Province, Country: florida
Are you saying if I measure ohms from the ground lead to case it should be 1m ohms? That low resistance tells me there is a leak to ground, right?
(This post was last modified: 11-11-2024, 09:03 AM by
daveone23 .)
Posts: 15,817
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Well, in the sch you provided (there is something missing at the very bottom, but I think it is GND), the sole connection to the case shown is the 1M resistor R31, which is used to bring the case and the GND under the same potential.
Unless I am missing something.
Of course there is a cap across that R31. And it could be bad. Or, again, we are missing something.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 95
Threads: 19
Joined: Jun 2024
City: tampa
State, Province, Country: florida
I guess I need to look at r31 and C7.
Attached Files
Image(s)
Posts: 15,817
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
That too.
There might be other things.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 95
Threads: 19
Joined: Jun 2024
City: tampa
State, Province, Country: florida
Interesting readings, r31 common ground to case bounced to 1meg on analog meter, r31 common to case bounced to 1meg. R31=1meg. Across c7, which is common to case with a parallel resistor = 40k ohms steady.
(This post was last modified: 11-13-2024, 11:41 AM by
daveone23 .)
Posts: 95
Threads: 19
Joined: Jun 2024
City: tampa
State, Province, Country: florida
My resistance readings are not even close. Worried about pins 1 and 6. Even though they are off, the meter works on dc 50v and higher.
(This post was last modified: 11-13-2024, 11:41 AM by
daveone23 .)
Posts: 15,817
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
>>r31 common ground to case bounced to 1meg on analog meter, r31 common to case bounced to 1meg.
Would you re-read and correct?
This does not make sense.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 15,817
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Check all your caps. Even ceramics. I am not sure what is going on.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 15,817
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Just occurred to me: what if you have a power transformer leak? From a, say, secondary to the case. If it is bolted to teh case.
Not sure how to better check it.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 95
Threads: 19
Joined: Jun 2024
City: tampa
State, Province, Country: florida
Thats a good thought but the secondary does go to ground via R30 27k resistor.
Posts: 15,817
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Yes.....it would connect GND to case, and you do have 1MOhm.....
I am not sure how the wiper has resistance to the case.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 11-14-2024, 10:29 AM by
morzh .)
Posts: 95
Threads: 19
Joined: Jun 2024
City: tampa
State, Province, Country: florida
From now on iam using an analog meter. R31 removed is 1 meg and c7 .01 but chassis to common is 600k. Why is that?
Posts: 15,817
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Are you saying the Chassis to GND became LESS when you removed the R31?
And we are sure the C7 and other caps are not leaking?
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 95
Threads: 19
Joined: Jun 2024
City: tampa
State, Province, Country: florida
Yep, hunting down the source. Will get back to you. Thanks
Users browsing this thread: 2 Guest(s)
Recent Posts
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit. That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim
Well...a chassis is metal. Magnetic or not, it does not matter.
A transformer has some hum to it. It is natural....morzh — 08:40 PM
Shadow Meter Bulb
Ross
I am not sure what current limiting effect the incandescent provides.
They are two different parts of the sch...morzh — 08:31 PM
12' Philco
Bob
Thanks for that photo.
I have been looking for it, and I cannot find anythinmg on the web.
I forgot it was here...morzh — 08:29 PM
Shadow Meter Bulb
I think after all has been said, I will use the same bulb that is specified for the dial pilot light which is a #55.
I ...georgetownjohn — 07:31 PM
12' Philco
There was also this Philco!
klondike98 — 07:25 PM
HiFi (Chifi) tube amp build - but my own design.
I expected a challenge and this is just part of it. But, it's also supposed to be fun, entertaining, informative and enj...TV MAN — 07:12 PM
Shadow Meter Bulb
Butting in here with a question. Since the shadow meter is connected directly to the 1st and 2nd I.F.'s wouldn't the met...RossH — 06:43 PM
HiFi (Chifi) tube amp build - but my own design.
Mike, Tim; you are about to enter the twilight zone. Doo doo doo doo, doo doo doo doo
This is something alright. I'm go...RodB — 06:26 PM
HiFi (Chifi) tube amp build - but my own design.
:lol: We need to start a singing radio group! I play the guitar, so maybe get a few vocals? Anyways, Mike, I did try mou...TV MAN — 05:56 PM
Who's Online
There are currently 6593 online users. [Complete List ]» 1 Member(s) | 6592 Guest(s)