Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Another Update on model 87 restoration
#16

I added a line bypass cap, and there wasn't a noticible difference in the hum, but after the set warmed up a few seconds I got a very very loud hum/buzz, like you get when the filter caps are bad. I think something blew. I pulled the condenser can and don't see any visible damage there. I'm going to step away from it for a couple of days and start from scratch. I think I'll replace the caps in the can again just to eliminate that as a problem and go from there, rechecking all of the wiring in the whole chassis.
#17

Beware that back in the day this set was made there were not any flourescent lamps, dimmers, wall wart transformers, and new fangled light bulbs to murder AM radio. Worst offenders are battery chargers and cheap gadgets.




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
Hickok 288x
One problem i noticed is there is no real voltage on the 31 caps, 20uf elec. On the probes, good machine X1=8ohms X10...daveone23 — 02:50 PM
Replicating (dogbone) resistors what method have you used ?
John did you see the domino style capacitors that he made too. No, I did not see those Richard. I'll have to try and...Eliot Ness — 02:19 PM
Philco 89B code 123 newbie
Back to working on this, pretty much everything is done minus the RF coil, which I'm putting off until last.  Thanks for...Kurt P — 02:07 PM
Does the 20 Deluxe use photofinish?
I recently bought a can of oms and it now says Lo-odor mineral spirits. When I use citrus stripper I leave it on for...RodB — 11:09 AM
Does the 20 Deluxe use photofinish?
It's on a scale of how bad is it compared to... Naphtha, chlorine bleach, mek, and lacquer thinner it's odorless.Radioroslyn — 10:26 AM
Does the 20 Deluxe use photofinish?
Yeah, always wondered why they call them spirits "odorless". It sure enough smell like a gas station.morzh — 10:10 AM
Does the 20 Deluxe use photofinish?
I usually don't do any sanding till all the stripping is done. The veneer on the cabinet is thin and it is easy to sand ...Radioroslyn — 09:49 AM
HiFi (Chifi) tube amp build - but my own design.
As I remember it, the shock from that B+, about 250VDC, felt worse than the shocks I experienced from 220VAC.morzh — 09:14 AM
Hickok 288x
They worked for 85 years as .05's and my other machine which operated perfectly has them. Doubt thats the issue. What ty...daveone23 — 09:01 AM
462ron
LOL@ MrFixr. I remember an encounter with my first tube radio.. I think I have posted this before. Back when I knew just...462ron — 08:07 AM

[-]
Who's Online
There are currently 3395 online users. [Complete List]
» 2 Member(s) | 3393 Guest(s)
AvatarAvatar

>