Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Sondowner, yes, email received, and I thank you.
Jayce - yep, an additional building could be helpful for many of us...
--
Ron Ramirez
Ferdinand IN
Posts: 244
Threads: 24
Joined: Feb 2006
Sweet Ron. Every time you open those doors you want to say TA DA!
Phil aka Philbert Q. Desenex - Twin Cities, MN
Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
Ron Ramirez Wrote:Jayce - yep, an additional building could be helpful for many of us...  My trailer is beginning to feel more and more like a game of Tetris.. and I can't get the peices to fit! Ack!
No matter where you go, there you are.
Posts: 299
Threads: 107
Joined: Mar 2011
City: Sheboygan Falls,Wisconsin
Congratulations Ron on your new finds as well as your college graduation  Both are terrific accomplishments!!
Posts: 3,152
Threads: 56
Joined: Apr 2011
City: Lexington, KY
Congratulations Ron! I know you worked hard on your degree and those radios are a very nice graduation present. Your 37-690X is a gorgeous radio!
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 7,300
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Boy oh Boy you've got yourself a couple of real beauties!!! Hope there easy restoration with any major problems.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
Unbelievable Haul....Once in a Million Years.
El Dorado for you!
Posts: 4,436
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Hi Ron:
Is there a story(ies)you have about acquiring these two corkers? There is usually always a good story with a neat find. I would understand not wishing to reveal your sources!
Congrats.
Tubetalk1
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Posts: 4,877
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
Ron;
Assuming that the 37-690 is unrestored electrically will you be posting a thread of that restoration when the time comes? Have you thought of making a series of Bob Andersen style restoration videos to document it? It would be neat to see and hear one of those 37-690s in operation? It's a shame that I am nowhere near that 37-690 on craigslist but I may find one around here, who knows?
Regards
Arran
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Thanks to everyone for the well wishes, I really appreciate your kindness.
Paul - as I mentioned earlier in this thread, I bought myself the 37-690 as a graduation present for myself, having earned my associate degree in Information Technology, Summa Cum Laude, Phi Theta Kappa (3.974 GPA). Not bad for an old man.
Tom (TA) - That is a very nice thing to say, thank you!
Arran - Sorry, I don't have a video camera. (Although, I think Debbie might have one?) Anyway, this 37-690 is working and has been worked on in the recent past. However, at some point I am probably going to go through it again. I looked under the upper chassis and found that none of the bakelite blocks had been rebuilt; new yellow Mylar caps were connected across the bakelite blocks instead. This set deserves a proper electronic restoration, and as time allows, it shall receive one. I guess I had better start saving those old wax paper caps for when the time comes to do this, else I'll be in the same boat as Etech when he redid his 38-690. I usually don't bother restuffing wax paper caps. But on a really nice set such as this one, yes, I will take the extra effort to do this.
--
Ron Ramirez
Ferdinand IN
Posts: 237
Threads: 24
Joined: Dec 2007
City: Gladwin, MI
Ron Ramirez Wrote:This set deserves a proper electronic restoration, and as time allows, it shall receive one. I guess I had better start saving those old wax paper caps for when the time comes to do this, else I'll be in the same boat as Etech when he redid his 38-690. I usually don't bother restuffing wax paper caps. But on a really nice set such as this one, yes, I will take the extra effort to do this.
Yes, the proper values are kind of hard to come by. Fortunately, due to the generosity of our antique radio communities, out of 24 missing Philco paper caps I have only these five still missing.
Quantity.....P/N.................Value
1----------------30-4334----------.004uF
1----------------30-4419----------.02uF
2----------------30-4449----------.03uF
1----------------30-4512----------.05uF
If I am unable to find these last five, I will use substitutes. I do have most of the correct values to replace these, just not the right part number.
Ed
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Philco model 40-100
|
Arran, I restored 2 Canadian battery-crank telephones for a friend a while ago, a Northern Electric (Canadian version of...MrFixr55 — 08:04 AM |
Road Trip for a Philco 46-480
|
Beautiful work, a 79 year old radio brought back to life. The first FM radios for me, a little iffy, had some I just cou...Jimradio — 08:01 AM |
Philco 46-480 Electronic Restoration
|
I was a field engineer for a biomedical company for many years. Many was the time that I was driving home from NYC in t...MrFixr55 — 06:40 AM |
Philco 46-480 Electronic Restoration
|
Don't laugh folks, I have not been above taking a chassis into the bathtub (when Ms. Fixr was out of the house), taping ...MrFixr55 — 06:02 AM |
Philco model 40-100
|
Marion;
By "newer style" carbon resistors do you mean the molded type with coloured bands rather then the BE...Arran — 01:00 AM |
Philco 46-480 Electronic Restoration
|
hello jrblasde ,
your radio sounds great well done !!
I bought like 20 years ago a Philco 610b that someone had painte...radiorich — 11:50 PM |
Philco model 40-100
|
Arran,
I just can't tell if the volume control has been replaced. The control has a brass shaft with one half flat for ...mhamby — 11:08 PM |
Philco model 40-100
|
You may be able to make the part out of wood. The particular vendor has a habit of disassembling radios and selling the...MrFixr55 — 10:09 PM |
Philco 46-480 Electronic Restoration
|
Used to get to Bentonville when I worked for a Walmart vendor....nice and sleepy back then. PaulPaul Philco322 — 09:49 PM |
Philco Model 249 made in England
|
Did Garrard produce stand-alone turntables? The reason I ask is, when I was a kid my grandfather gave me a KLH Model 20 ...jrblasde — 09:37 PM |
Who's Online
|
There are currently 577 online users. [Complete List] » 3 Member(s) | 574 Guest(s)
|
|
|

|