Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

41-327 retouching black paint
#1

This has missing paint chips on the case. Would you just use a black laquer stic on this? Otherwise the case is in good shape so I don’t to refinish it all.


Attached Files Image(s)
   
#2

Yes, and you'll be amazed at the results.
#3

Ok. I ordered one of those this morning.
#4

If the lacquer stick doesn’t work out it’s not that big a job to remove the chassis, mask off the black, lightly sand and respray with black lacquer.
#5

Actually I got that in and used it this morning. Seems to work very well.
Do you just let it dry and then use wax on the cabinet or something else?
I have just been cleaning with the non abrasive Goop, using some feed n wax followed by two coats of Johnsons paste wax.
#6

Yes I just let it dry. I would let it dry for several weeks before waxing as lacquers can take quite awhile to fully cure. I've used both the Feed n Wax product and paste waxes. Its more a matter of what you want the end sheen to be.
#7

Hello guys,
Yes, I have used a laquer stic on furniture never on radio yet .

Sincerely Richard




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 45-6365 Universal IFT Instruction Manual
Dale: Modified topic as suggested. It is not for a specific project. I found it in a box of stuff I recently purchased...GRG — 10:34 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind ... That is a MIL-5015 style connector, used in a wide v...DaleHCook — 10:19 AM
Philco P45-6365 Universal Transformer Instruction Manual
I would suggest changing the topic from "P45-6365 Universal Transformer" to "45-6365 Universal IFT."...DaleHCook — 10:08 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated. By dconant. Dittos'Jimradio — 08:01 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind, even if it's a U.S.N power supply. I have a book somewhere abo...Arran — 02:56 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
hello david, I have a similar generator in my collection that features a cast iron, single-cylinder Briggs & Stratt...radiorich — 01:00 AM
under chassis parts locator diagram for 1938 Zenith 9s262
Has anyone gone to the trouble of creating an under chassis parts locator image?  Yes, I can identify components by foll...bobloney — 08:57 PM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
Try looking at this site the book mark is for a old generator that I was given. David    https://radionerds.com/index.ph...David — 08:36 PM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
Hello Everyone, I am looking for voltage identification for all the pin positions on the socket of a CRV-20130 power su...Tonym4704 — 08:16 PM
Philco 45-6365 Universal IFT Instruction Manual
Can anyone guide me to where this may be found?GRG — 03:00 PM

[-]
Who's Online
There are currently 1853 online users. [Complete List]
» 2 Member(s) | 1851 Guest(s)
AvatarAvatar

>