CAN'T FIGURE OUT THE MODEL
Posts: 28
Threads: 7
Joined: Jun 2011
I have a chassis with a label saying it's a model 38 which is a battery powered unit. My problem is trying to identify the cabinet. It's like a model 28L,32L, 38L,45L or a 89L except on mine the word "PHILCO" is between the top knob and the bottom 3 knobs whereas on the 5 models listed, "PHILCO" is just below the dial. Any help will be appreciated. Bill
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
That sounds right for a 1935 (June 1934) model 38L.
I don't have a good photo of an actual 38L in the Gallery (hint, hint)...
--
Ron Ramirez
Ferdinand IN
Posts: 28
Threads: 7
Joined: Jun 2011
Ron, Found a photo of it on the radiomuseum.org web site. Looks like it was made in the 1933-34 time frame. Now my next question is do I refer to it as a model 38L or a 38-38L?
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Okay, I'll be more direct: Would you be willing to furnish a photo of your 38L for my site's Gallery? It would be very much appreciated.
Now I'm confused. Does your set look like this:
http://www.philcoradio.com/gallery/1933c.htm#p
or like this:
http://www.philcoradio.com/gallery/1935a.htm#s
--
Ron Ramirez
Ferdinand IN
Posts: 28
Threads: 7
Joined: Jun 2011
Neither one. It's shown on "radiomuseum.com" Just type in Philco 38L and there it is. I'm sure you can get a copy off their site.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
A 38L looks like one of the two links on my gallery. The knob layout of the later 38L shown in my Gallery is different than an actual 38L...because no one has sent a better photo to me for use in the Gallery.
--
Ron Ramirez
Ferdinand IN
Posts: 28
Threads: 7
Joined: Jun 2011
Sorry to bother you but I don't have a photo to send you. If I did I wouldn't have had to ask the question in the first place! I sent you an email showing you what I'm refeering to. I going to work on this over the winter and when I'm finished you'll be the first on my list to get a good picture of it.
Posts: 6
Threads: 1
Joined: Aug 2011
I looked at the radiomuseum site (actually .org) and there were two different 38Ls that come up: early and late. So I can understand the moderator's questions. Perhaps you could give a direct link to the exact one. It seems he's only trying to help.
Posts: 28
Threads: 7
Joined: Jun 2011
The one I have is the late model 38L
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
First of all, I want to apologize to WillieC.
That having been said, however, it is rather frustrating when I post a link to a cabinet matching a 1935 model 38L only to be told "no, that isn't it." (And it is that frustration that initially prompted a rant from me which I deleted after I got over my anger, and for which I have apologized above.) Sorry, but yes, it is! Philco made this same type of cabinet for no less than five different models (28L, 32L, 38L, 45L, 89L). Yes, the five differ in knob layout and the chassis contained inside, but that is the extent of the differences.
Believe me, I don't like having to use catalog illustrations instead of actual photos in the Gallery. I don't own a copy of every Philco ever made; I have no desire to do so; I don't own a warehouse to store all of them in anyway. Therefore I depend on other folks to furnish good photos for use in this site's Gallery (and may I remind you that this site's Gallery, as well as all of the information contained in Philcoradio.com, is free to all). Many have graciously donated photos to this site's Gallery, which I am very appreciative of. Many others have not; they give their pictures to Radiomuseum, Radio Attic Archives, etc. That's their right.
But please remember: Since this website specializes in one brand, I have taken the time to make sure the Gallery is as accurate as possible. I believe this site's Gallery is more accurate than any other website's photo sections. Period, end of story.
Bottom line: If it says "CHASSIS TYPE 38" on the chassis sticker, and has a cabinet like that shown here:
http://www.philcoradio.com/gallery/1935a.htm#s
then it is a 1935 model 38L, introduced to the public in June 1934.
It is the same style cabinet as shown on the other site at this link:
http://www.radiomuseum.org/dsp_modell.cf...rewrite=on
Natalia, welcome and thanks for the defense.
--
Ron Ramirez
Ferdinand IN
Posts: 28
Threads: 7
Joined: Jun 2011
Not only are the cabinets different but the chassis are different as well due to the knob layout. For Philco to market these as the same model was utterly stupid. The more I get into this I'm now finding there are two different "late" model 38L cabinets.
Posts: 4,707
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
williec Wrote:Not only are the cabinets different but the chassis are different as well due to the knob layout. For Philco to market these as the same model was utterly stupid. The more I get into this I'm now finding there are two different "late" model 38L cabinets.
Lets me try an explain again, the photo in the gallery is not of a model 38L as there is no photo of a model 38L in the gallery, it is of another model that happened to share the same cabinet design as a 38L, this is why the control locations do not match your set. Philco used to do this, they would produce one given style of cabinet and fit several different chassis in the same cabinet with a different model number with a different front panel. A recent example in another thread is the model 643 that Bob is working on, his is a battery set but philco used a similar cabinet for a Philco 650 which is an AC operated set. The Philco model numbers relate to the chassis, it has nothing to do with the cabinet, a model 38 is still a model 38 regardless of what cabinet they mounted the chassis into, it's the letter after it that denotes what cabinet style the set has, "L" stands for lowboy, "H" stands for highboy, "B" stands for "Baby Grand", "X" means that the cabinet is fully skirted and has an inclined speaker board, "M" means modern style.
Regards
Arran
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Philco 60 Squealing
|
Usually a wave trap is for keeping IF signals from entering the antenna and from leaving the antenna. You feed an IF sig...RodB — 09:30 PM |
Philco 60 Squealing
|
I just peaked it for the best signal at 600.
NULL it for IF frequency, originally it would have been null for 500kh...Chas — 08:05 PM |
Philco 60 Squealing
|
Wavetrap no longer matters.morzh — 05:19 PM |
Philco 60 Squealing
|
Rod, I had checked out your suggestions but did not help. I did solder the ground rivets to the chassis as Chas suggeste...dconant — 04:52 PM |
37-690 Bass Choke Replacement
|
Yeah, I know, Mouser and Digikey don't have "big iron" components. For some reason Philco was messing with the...Radiodial — 04:25 PM |
37-690 Bass Choke Replacement
|
Yes, I just had to deal with that while repairing the 37-604 Philco. Exactly that value choke was gone. And the current ...morzh — 03:52 PM |
37-690 Bass Choke Replacement
|
Ah, now where to find one.
I've into this before on smaller sets, I now recall. Hammond makes one that is only rated...Radiodial — 03:27 PM |
Philco 38-7 Speaker
|
Ask the admins to put them together.
As for the renaming, while inside the thread, you simply press "New reply&quo...morzh — 02:23 PM |
37-690 Bass Choke Replacement
|
This is the parts catalog.
32-7528 choke is 65H, 10mA, 2,250 Ohm inductance.
Find a suitable one.morzh — 02:18 PM |
37-690 Bass Choke Replacement
|
While troubleshooting the no bass amplification issue, I think I found the culprit. The choke #104 is reading 164K ohms....Radiodial — 01:42 PM |
Who's Online
|
There are currently no members online. |
|
|