Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

philco 42-1013 caps
#1

Thought I would start a new thread seeing as I have a different chassis.
Working on re-capping this 42-1013 chassis that I got to replace the 42-1012 chassis with the bad power supply.
I bought a cap kit from Mark Oppat that should have all the caps needed.
Noticed that the 8-8mfd 475v cap has 2 positive leads.
The kit has 2 10uf 450v caps.I assume that the 2 new caps replace the old cap with 2 leads?
I was also shorted 1 of the 22-450v caps to replace the 2 18mfd-475 that are now present.
Is there anywhere that I can get one of these so I don't have to wait to get one mailed?
Thanks for your help.
murf
#2

murf Wrote:The kit has 2 10uf 450v caps.I assume that the 2 new caps replace the old cap with 2 leads?

Yes!

Is there anywhere that I can get one of these so I don't have to wait to get one mailed?

Hard to say, some areas have such a luxury and some don't.

Where do you live?

-Greg
#3

gvel Wrote:
murf Wrote:The kit has 2 10uf 450v caps.I assume that the 2 new caps replace the old cap with 2 leads?

Yes!

Is there anywhere that I can get one of these so I don't have to wait to get one mailed?

Hard to say, some areas have such a luxury and some don't.

Where do you live?
Got most of the caps in.
Got rid of the buzz,but I am not getting sound other than a very faint buzz from the speaker.
Maybe rectifier tube is week?
Doesn't the rectifier control the audio?
Have to keep digging I guess.
#4

murf Wrote:
gvel Wrote:
murf Wrote:The kit has 2 10uf 450v caps.I assume that the 2 new caps replace the old cap with 2 leads?

Yes!

Is there anywhere that I can get one of these so I don't have to wait to get one mailed?

Hard to say, some areas have such a luxury and some don't.

Where do you live?
Got most of the caps in.
Got rid of the buzz,but I am not getting sound other than a very faint buzz from the speaker.
Maybe rectifier tube is week?
Doesn't the rectifier control the audio?
Have to keep digging I guess.


Ok Guy's,
Got it re-capped and it's working now,but still has a buzz.
Someone earlier replace the volume switch with a combe on/off/volume switch due to a bad off switch.
Seems like the volume should be higher than it is now.
Seems like he used a switch rated lower than the original volume switch.
I could take the volume switch out of the old chassis,but then I would have to replace the power switch that is really difficult to remove.
Any suggestions?
Would at least like to get rid of the buzz.Thought the new caps would take care of that.
Thanks for your help.
Murf




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
42-345, question for an owner
+1 for number 4 with an added theorem: The more connections in a circuit the higher the possibility of failure.RodB — 12:17 PM
Help with Readrite 410 tube tester
IMHO, Between the transformer common (where you have one lead) and any point on the rotary switch, you should be reading...MrFixr55 — 11:53 AM
Help with Readrite 410 tube tester
This is such a simple looking schematic yet its throwing me off and driving my Fluke DMM crazy. I cant get real voltage ...daveone23 — 11:23 AM
42-345, question for an owner
Rod :lol: 1. The schematic always work according to the wiring. 2. If the schematic does not work according to the wir...morzh — 10:36 AM
42-345, question for an owner
Wow Mike, that's profound! That should be the Phorum motto.RodB — 09:49 AM
Philco 269 - 444 FIVE VALVE VERSION?
Hi Chas, I hear you. If you happen to be passing NYC vs Philly, I can give it a good home also. @ RadioRoslyn, T...MrFixr55 — 09:25 AM
Bakelite crack repair - what is best epoxy?
I'm with Arran, but I use even stronger epoxy with a 72 hour cure. It is sold to knife makers for bonding wooden handles...DaleHCook — 08:47 AM
42-345, question for an owner
It cannot be wired correctly and work incorrectly. It is as simple as this: if you want to have you treble up and bas...morzh — 08:33 AM
42-345, question for an owner
Welcome to the Phorum, Noel! I don't have that radio, but I'm sure others will jump in with help. Take care and BE HEA...GarySP — 07:52 AM
42-345, question for an owner
Hello,      I am working on a Philco 42-345.  It appears that there have been many hands inside this radio before me....UpNorth — 07:42 AM

[-]
Who's Online
There are currently no members online.

>