Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Need help identifying old Philco mahogany cabinet.
#1

Today I found this old Philco mahogany cabinet at a thrift store. The model number is 10853-3 can anyone tell me what it is and what year it was made? If you need a better more detailed picture's let me know. thanks.
#2

Michael,
That isn't a good Philco model number.
Pictures will help.

Carl
Northern Panhandle, WV
#3

The actual model number will either be on a blue and white paper tag, glued to the inside of the cabinet and visible, or it may be black ink-stamped on the rear of the chassis with also a Code number possibly.

Pictures will help us help you.

Chuck
#4

Pictures submitted by the OP:

[Image: http://i326.photobucket.com/albums/k420/...0007-1.jpg]

[Image: http://i326.photobucket.com/albums/k420/...0006-1.jpg]

10853 is the number of the cabinet itself. Probably later than 1949, I am guessing it would be in the 1950-52 era. Plus, from the looks of the interior, it appears that it was originally a TV-radio-phono combination before being gutted. I do not have any photos or illustrations of any Philco radios or radio-phonographs that match this cabinet.

--
Ron Ramirez
Ferdinand IN
#5

This cabinet was like the first TV that my family had when I was a kid. We got it in 1956 (was told to be a 1950 model) - it was used and the Philco dealer installed a new picture and installed a tall external antenna all for $100.00. The TV was on the left side and the radio and record changer was on the right side as viewed from the front. When the TV failed I removed the TV and radio part. I installed a newer type changer and amp and my mother used that until she died in 2006. I still have the two doors partly because of the wood and the other because of the many hours of enjoyment that it gave me.

Tom B




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM
Philco 42-345 Restoration/Repair
What does the resistor measure? I think it should be 3.3 Meg. If the oscillator coil has continuity and the resistanc...RodB — 09:03 PM
Philco Model 38-7: what caps & resistors do fail typically?
Good idea to check the coils... then I'll get hold of an incadescent light bulb and see what happens when the unit is sw...Musaeum — 08:49 PM
Philco 42-345 Restoration/Repair
I have that same set, ain't too much shortwave I like anyway.....it is a good AM DX set. PaulPaul Philco322 — 08:32 PM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum, Martin! Open a new thread in Philco Electronic Restoration when you begin working on your 38-7. ...GarySP — 08:28 PM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum! :wave: Here's the schematic for that radio from our digital library: Something to do bef...klondike98 — 08:05 PM
Philco Model 38-7: what caps & resistors do fail typically?
Hi all, on vacation in Montreal,  a friend of mine showed me a Philco Model 38-7 console radio from the 30ies. Mechan...Musaeum — 07:21 PM
Part numbers to model cross
I looked thru the documents and did not see one. Might have missed it though.Jim Dutridge — 07:16 PM
Philco 42-345 Restoration/Repair
Please tell me this was it, I replaced resistor 27 and it's playing on the broadcast band. I am afraid to change the ban...osanders0311 — 06:12 PM

[-]
Who's Online
There are currently 1021 online users. [Complete List]
» 3 Member(s) | 1018 Guest(s)
AvatarAvatarAvatar

>