Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Variation with the 37-650
#1

This question is primarily for Ron, but if anyone else has info as well, feel free to chime in.

I noted in the Philco Gallery a different variation on the 37-650 console. On that one, there are a couple of horizontal inlays on both side of the dial, and on mine, which is pictured in a previous thread on the Phorum:

http://philcoradio.com/phorum/showthread.php?tid=2

...it has 2 thin vertical inlays about 4 inces either side of the dial. This is the version of the 37-650 I've seen elsewhere besides the one I have. Otherwise, the two appear to be identical in every other aspect.

I'm just wondering if there is documentation regarding the two versions of this console, and how common it was to have this or other variations on other Philco models.

Thanks in advance for anything you can provide.

Bill

Sent from my Pentium II on the AT&T Dial Network
#2

Hi Bill,

Just an observation, but your radio appears to match with the 37-2650X in the gallery Icon_confused:

http://www.philcoradio.com/gallery/1937a.htm#bh

Paul
#3

You're right, Paul. That's pretty interesting. The variation could be indicated in the similar model numbers such as 37-650 and 37-2650.

Looking at the production figures, it does indicate totals include both models, so I guess that makes sense.

Paging Mr. Philco! Icon_biggrin Your thoughts?

Bill

Sent from my Pentium II on the AT&T Dial Network
#4

Let me look into this and get back to you. Bill, as you know, I've been "out of the loop" for awhile, so do you have a picture of your 37-650 posted here or elsewhere?

EDIT: I just noticed the link in your post above, Bill. DOH!!! Icon_confused Your 37-650 is a very nice set.

--
Ron Ramirez
Ferdinand IN
#5

OOPS!!! I don't often make mistakes Icon_lol but I see I have an incorrect photo in the Gallery. What is labeled a 37-650X is actually a 37-630X. I'll make the corrections later today.

Oh, and Bill, if you'd like to allow use of your 37-650X in the Gallery, I'd be honored...thanks.

--
Ron Ramirez
Ferdinand IN
#6

Actually, the honor would be all mine. Icon_biggrin

Do you need a photo that is reformatted, or is the one posted adequate? Let me know what you need.

Nonetheless, this was an interesting topic. I looked at the cabinet label and couldn't find anything that indicated "37-2650" anywhere, but the "37-650" was big and bold.

Goes to show we all learn something new all the time in the world of old radios. Icon_wink

Bill

Sent from my Pentium II on the AT&T Dial Network
#7

O.K., folks, Bill's 37-650X photo is now in the Philco Radio Gallery for the first half of the 1937 season (June 1936).

http://www.philcoradio.com/gallery/1937a.htm#at

Many thanks to Bill for allowing use of his photo. And my sincere apologies for the initial error in pictures. Dealing with the sheer number of Philco models produced, the occasional error is bound to creep in. Icon_redface But at least in HTML format, changes/corrections can be easily made.

--
Ron Ramirez
Ferdinand IN
#8

Ron,

Always happy to help out any way I can.

Now, I'm assuming the other picture was of a 37-630, which was a terrific shot. Are you going to use that one in place of the catalog picture?

Bill

Sent from my Pentium II on the AT&T Dial Network
#9

Yup, I'll make that correction also...

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
12' Philco
If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel. Kareem would have an e...morzh — 01:48 PM
12' Philco
And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM
Hickok AC51 tube tester
I think they have only shown the secondaries of the transformer. Two of them feed the rectifiers' filaments.morzh — 12:58 PM
IF can wire size and Rubber mounts?
Arran If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM
12' Philco
Rod, Yes, I know, but the Giant Philco is not around anymore either, so I go by whoever was alive fairly recently. H...morzh — 12:54 PM
Hickok AC51 tube tester
Absolutely no one is going to reverse engineer that circuit. Even the iron core is missing.RodB — 10:37 AM
IF can wire size and Rubber mounts?
Thanks to both members for your help regarding wire and tuner mtg supports. regards--Johngeorgetownjohn — 09:33 AM
Hickok AC51 tube tester
Note that no power cord, power switch, or power transformer switch are shown. That (along with my experience with full s...DaleHCook — 07:09 AM
IF can wire size and Rubber mounts?
A pair of wire strippers can give you an idea of what the existing gauge of the wire leads are in the IF can, I think it...Arran — 06:07 AM
My last cabinet for this year
Hello Dan, That is really beautiful what great looking radio you have ! I have friends who live in Calgary and the wea...radiorich — 01:51 AM

[-]
Who's Online
There are currently 5501 online users. [Complete List]
» 4 Member(s) | 5497 Guest(s)
AvatarAvatarAvatarAvatar

>