Variation with the 37-650
Posts: 236
Threads: 30
Joined: Sep 2005
City: Minneapolis/St. Paul MN
This question is primarily for Ron, but if anyone else has info as well, feel free to chime in.
I noted in the Philco Gallery a different variation on the 37-650 console. On that one, there are a couple of horizontal inlays on both side of the dial, and on mine, which is pictured in a previous thread on the Phorum:
http://philcoradio.com/phorum/showthread.php?tid=2
...it has 2 thin vertical inlays about 4 inces either side of the dial. This is the version of the 37-650 I've seen elsewhere besides the one I have. Otherwise, the two appear to be identical in every other aspect.
I'm just wondering if there is documentation regarding the two versions of this console, and how common it was to have this or other variations on other Philco models.
Thanks in advance for anything you can provide.
Bill
Sent from my Pentium II on the AT&T Dial Network
Posts: 69
Threads: 14
Joined: Sep 2005
City: Woburn, MA
Hi Bill,
Just an observation, but your radio appears to match with the 37-2650X in the gallery  :
http://www.philcoradio.com/gallery/1937a.htm#bh
Paul
Posts: 236
Threads: 30
Joined: Sep 2005
City: Minneapolis/St. Paul MN
You're right, Paul. That's pretty interesting. The variation could be indicated in the similar model numbers such as 37-650 and 37-2650.
Looking at the production figures, it does indicate totals include both models, so I guess that makes sense.
Paging Mr. Philco!  Your thoughts?
Bill
Sent from my Pentium II on the AT&T Dial Network
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Let me look into this and get back to you. Bill, as you know, I've been "out of the loop" for awhile, so do you have a picture of your 37-650 posted here or elsewhere?
EDIT: I just noticed the link in your post above, Bill. DOH!!!  Your 37-650 is a very nice set.
--
Ron Ramirez
Ferdinand IN
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
OOPS!!! I don't often make mistakes  but I see I have an incorrect photo in the Gallery. What is labeled a 37-650X is actually a 37-630X. I'll make the corrections later today.
Oh, and Bill, if you'd like to allow use of your 37-650X in the Gallery, I'd be honored...thanks.
--
Ron Ramirez
Ferdinand IN
Posts: 236
Threads: 30
Joined: Sep 2005
City: Minneapolis/St. Paul MN
Actually, the honor would be all mine.
Do you need a photo that is reformatted, or is the one posted adequate? Let me know what you need.
Nonetheless, this was an interesting topic. I looked at the cabinet label and couldn't find anything that indicated "37-2650" anywhere, but the "37-650" was big and bold.
Goes to show we all learn something new all the time in the world of old radios.
Bill
Sent from my Pentium II on the AT&T Dial Network
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
O.K., folks, Bill's 37-650X photo is now in the Philco Radio Gallery for the first half of the 1937 season (June 1936).
http://www.philcoradio.com/gallery/1937a.htm#at
Many thanks to Bill for allowing use of his photo. And my sincere apologies for the initial error in pictures. Dealing with the sheer number of Philco models produced, the occasional error is bound to creep in.  But at least in HTML format, changes/corrections can be easily made.
--
Ron Ramirez
Ferdinand IN
Posts: 236
Threads: 30
Joined: Sep 2005
City: Minneapolis/St. Paul MN
Ron,
Always happy to help out any way I can.
Now, I'm assuming the other picture was of a 37-630, which was a terrific shot. Are you going to use that one in place of the catalog picture?
Bill
Sent from my Pentium II on the AT&T Dial Network
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Yup, I'll make that correction also...
--
Ron Ramirez
Ferdinand IN
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Philco P45-6365 Universal Transformer Instruction Manual
|
| Can anyone guide me to where this may be found?GRG — 03:00 PM |
|
54C Complete Teardown/Rebuild
|
| I don't think that I have encountered a 12Z3 before, curious how it uses one of those but includes a #43, which is a 25 ...Arran — 02:17 PM |
|
HiFi (Chifi) tube amp build - but my own design.
|
| It's the other forum. I'm also in DIY, but mostly read there. Honestly, I kinda jumped into this without much thought to...TV MAN — 10:43 AM |
|
Philco 71 Code 125
|
| Hello,
I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM |
|
Stromberg Carlson 1500 Squeal
|
| And life just keeps getting more complicated.dconant — 07:57 AM |
|
54C Complete Teardown/Rebuild
|
| Hello Roy,
here is this one
sincerely Richardradiorich — 12:45 AM |
|
54C Complete Teardown/Rebuild
|
| Richard,
Had grabbed it already but thank you just the same. I find myself wanting to find some way to block out the...glyphmon — 12:03 AM |
|
54C Complete Teardown/Rebuild
|
| Hello roy,
here is a link to the schematic .
Sincerely Richardradiorich — 11:54 PM |
|
54C Complete Teardown/Rebuild
|
| Richard,
The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Did an alignment today which was interesting. IF alignment went great, almost all was already spot-on. Adjusting on th...glyphmon — 11:35 PM |
|
Who's Online
|
There are currently 2020 online users. [Complete List] » 2 Member(s) | 2018 Guest(s)
|
|
|
|

|