Have gone over to the other side!
Posts: 7,300
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
A friend of mine gave me one of the red ones that didn't work. So I had to fix it!! Then they started multiplying. What's a fella to do. Good playing sets!!
http://www.flickr.com/photos/53710524@N0...hotostream
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 262
Threads: 27
Joined: Jan 2010
City: Rochester, NY
Whats this world comming to?
Posts: 7,300
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
It was just a short trip over to the other side. My dad worked the Motorola from the mid 60's in to the 1980's. He was on the 2 way radio side not the entertainment side of things. When is see something interesting that's Motorola I pick it up. In this case the first one was free! The other two I found on epay. The Airboy is kewl but I haven't seen a nice one that had a fair price.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
It seems to be always one of the electrolytic caps. I have a little Philco that is absoute dynamite.
Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
No shame in have a few transistor radios in the collection, especially the neat ones like those. They definitely take up less space and weigh far less than the hobby I have crossed over to in the past year's time. I have crossed over into the vintage arcade game side. 
No matter where you go, there you are.
Posts: 262
Threads: 27
Joined: Jan 2010
City: Rochester, NY
I confess to having a few little guys. Got a couple different Sony Watchmans and even started collecting old Mics.
Man i feel better. Maybe the mrs will let me skip church tomorrow!
Posts: 7,300
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Don't skip church. I always feel better when I go!!
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 7,300
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
That's all I had to do on this one was replace 4 caps and fix a few broken wires on the loop antenna. A bit of a pain as the wire is very small. The original battery was a 226 which looks like a C cell with snaps on each end and it's 9v. The newer 9v battery would fit but it would put a bit of stress on the plastic cabinet. So I used a pair of vice-grips to shrink the width of the battery. It wasn't very pretty but now I've got a bit of space in the battery space with out stressing the case.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 91
Threads: 9
Joined: Feb 2010
City: Macon, GA
7estatdef Wrote:It was just a short trip over to the other side. My dad worked the Motorola from the mid 60's in to the 1980's. He was on the 2 way radio side not the entertainment side of things. When is see something interesting that's Motorola I pick it up. I can't fault you for picking Motorola. I'm a bit partial to them myself, and for a similar reason. I'm a tech on the two-way side of the house too.
Dave
Posts: 7,300
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Back in the 70's I did some work for a dealer doing installs of motrac's mocom70's and every once in a while al T Power or TwinV for a cheap skate that didn't want to upgrade his 20 yr old stuff.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 91
Threads: 9
Joined: Feb 2010
City: Macon, GA
Believe it or not, I still see some of those dinosaurs from time to time. I've got a few Mocom 70's that still look brand new.
Dave
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Terry: if you want to have some fun, the next time your wife is giving you a hard time, run over, grab one of your transistor sets, flip it open, and yell into it "Quick, Scotty, beam me up!!!"
Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
TA Forbes Wrote:Terry: if you want to have some fun, the next time your wife is giving you a hard time, run over, grab one of your transistor sets, flip it open, and yell into it "Quick, Scotty, beam me up!!!"
No matter where you go, there you are.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Philco 42-345 Restoration/Repair
|
| I am back to working on this radio and managed to get a couple of radio stations to come in. But can someone help me to ...osanders0311 — 01:58 PM |
|
48-482 rear panel help
|
| Hi Kettlechip and welcom to the Phorum.
The back panel question is interesting. I have quite a few radios that use pow...MrFixr55 — 08:24 AM |
|
Philco 46-480 Electronic Restoration
|
| Not too much at all! :lol: Sounds like you’re just dabbling into the hobby!jrblasde — 07:56 AM |
|
Philco 46-480 Electronic Restoration
|
| Hi Joseph,
Fortunately, Ms. Fixr does not read my computer, or she would warn you against coming to me for sanity ch...MrFixr55 — 07:27 AM |
|
48-482 rear panel help
|
| There's a picture of one of the plastic covers in the following thread:
I bought a full set of them in 2012 or so fro...klondike98 — 11:15 PM |
|
Philco 46-480 Electronic Restoration
|
| Good sanity check! You are correct—the first (as in, the most counterclockwise) position is for the push button presets....jrblasde — 11:05 PM |
|
Philco 46-480 Electronic Restoration
|
| Hi Joseph,
First, verify that your band selector is in the correct position for what you want to do. I believe tha...MrFixr55 — 10:59 PM |
|
Philco 46-480 Electronic Restoration
|
| Got my replacement signal generator in the mail today! I was able to finish alignment of the IF section. I’ve got some t...jrblasde — 09:58 PM |
|
The list of my radio & TV collection!
|
| EdHolland. Glad you liked it. Thanks for the supportRadioSvit — 05:24 PM |
|
The list of my radio & TV collection!
|
| Great stuff, Peter thank you for posting.EdHolland — 04:06 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
