Posts: 370
Threads: 102
Joined: Jul 2011
City: Calgary, AB, CA
I have a Philco model 345,,, code 122 radio..I believe that the radio is Canadian. I took one of the baklite blocks apart and inside ,,there are two caps marked '''9'',and ''10''. The schematics show that this whole cap is .09 mf... I do not know what to put in the block because there are two caps in it. These two caps have no value printed on them
On the schematic of my radio it is #22 and the part number is 3615W
I hope I have made myself clear,if not please let me know..thanks Dan
Living in Calgary Alberta
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
According to the information I have, and what Chuck has on his site, a 3615W only has one capacitor inside, a .05 uF.
http://www.philcoradio.com/tech/images/bakelite.pdf
http://www.philcorepairbench.com/bblokcap.htm
Are you sure it is 3615W?
--
Ron Ramirez
Ferdinand IN
Posts: 370
Threads: 102
Joined: Jul 2011
City: Calgary, AB, CA
Ron I must say that I am sorry but I made a mistake in the numbers of the block... The proper number is 4989Z which[using the info you gave me ] transfers to a number of 4989 odg...If I have this right it means that I can put two caps of .10 in the block and hook them up to the same pins as the old ones.. According to what I see it is #1 to #5 and #2 to #3...[.Pin #1 and #2 are connected and go to ground] WOULD THIS BE CORRECT?
Once again I am sorry for the inconvenience this may have caused you,I will be more carefull with my numbers next time. Thank you Dan
Living in Calgary Alberta
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Dan - No problem, really.
I see Chuck doesn't have 4989-Z listed on his site.
I don't have the
Philco Condensers And More book by Ray Bintliff, but I have an earlier edition -
The Radio Collector's Guide to Philco Bakelite Block Condensers, 2nd Edition.
See drawing below.
[Image:
http://i326.photobucket.com/albums/k420/...bblock.jpg]
According to the book I have, terminals 1 and 8 are connected to common ground.
One .09 uF cap connects from 8 to 7.
The other .09 uF cap connects from 8 to 5.
--
Ron Ramirez
Ferdinand IN
Posts: 909
Threads: 117
Joined: Jun 2007
Rons info is exactly correct according to my Ray Bintliff "Philco Condensers & More" 2nd edition book.
Posts: 289
Threads: 40
Joined: Oct 2011
City: Las Vegas, NV
if someone has the older book (wink Wink Ron) can you check the values on a 6287-G the new yellow book lists it as a 0.05 and 0.0.15
John
Las Vegas, NV USA
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Using the diagram in my previous post as a guide, the 0.15 uF cap connects between terminals 8 and 7, while the .05 uF cap connects between 8 and 5.
--
Ron Ramirez
Ferdinand IN
Posts: 292
Threads: 17
Joined: Aug 2010
City: Yorkville IL
Here the link to Chuck's site with alot of block info :
http://www.philcorepairbench.com/bblokcap.htm
Glenn
Happily back in Illinois..not.
Posts: 438
Threads: 15
Joined: Jul 2008
City: Anacortes, WA
Ron Ramirez Wrote:Dan - No problem, really.
I see Chuck doesn't have 4989-Z listed on his site.
I don't have the Philco Condensers And More book by Ray Bintliff, but I have an earlier edition - The Radio Collector's Guide to Philco Bakelite Block Condensers, 2nd Edition.
See drawing below.
[Image: http://i326.photobucket.com/albums/k420/...bblock.jpg]
With apologies... securing a digital copy of that B.B.C. for note-taking when rebuilding.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
