Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

116X and the 6A3 tube
#1

Well, I already know my set has weak tubes, in fact one is very weak. Anyhow I used to purchase my tubes from a gent in Ohio (Bill or Bob?), Pick-a-Tube I believe. Heck it's been awhile. Anyhow suggestions on were to purchase them?

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#2

Bob Dobush at Find A Tube.

http://www.findatube.com/

Whenever I need tubes, I usually contact Bob first...great prices, great service, no complaints. A good guy to deal with.

Jim Cross at Vacuum Tubes, Inc. (who used to live in Ohio) is another honest seller.
http://www.vacuumtubesinc.com/

When it comes to tubes, the Ohioans are the good guys...not that the others are bad, only that I've had personal experience buying from both and can recommend either one.

--
Ron Ramirez
Ferdinand IN
#3

Bob would be the guy, thanks Ron.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#4

Comrade, the Russians now make 2A3 for your fine American radio.

http://www.tubedepot.com/so-2a3.html
I think there is a Chinese version as well. Available at K-mart, Martha Stewart brand I think.

But, I would look for a used American one (6A3).

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#5

The same seller also has Sovtek 6A3 tubes. Sold as a matched pair only, $129.95 for the pair.

http://tubedepot.com/so-6a3.html

Don't forget your Tube Cube for your nice, new, expensive Sovtek tubes.

...or, buy two 6A3 tubes from Findatube.com for $28.00 each NOS, or $18.00 each used.

Hmmm...new Sovtek for $129.95 or NOS from Bob for $56.00?

Ask Charlie what he thinks about this choice:
http://www.youtube.com/watch?feature=end...FKfQN5Y7Ds

--
Ron Ramirez
Ferdinand IN
#6

Wow!
Bob does have some very good prices on both new and used. Never have bought tubes from him but he is a good source for Sam's folders. Have gotten some TV folders from him over the years. Good guy and fast service.
Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#7

Picture of Bob watching aliens land starship in his back yard:


[attachment=0]

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#8

LOL.... I met Bob about 5/6 years ago at an on-site auction. Naturally plenty of tubes to be auctioned for everyone... Nice guy Icon_wink I did see the Russian versions. But I cannot bring myself to stuff those in one of my fine American made Philco's (or any American radio for that matter). If that's all there was or the American made versions hit $250 a tube, I'll consider it.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#9

From what I've heard from some of my ham buddies the Russian tube are ok but the Chinese jobs are not very good. I'd stay away from them. Agree with Ron a good pair of used US tubes is your best and cheaper way to go. The reliability will the best.
GL and hold on to your wallet.
Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#10

I have used Bob several times and he is great to deal with. His prices for 6A3s, 6L6s, and 6B4s are better than what you will find on eBay. Plus his tube for sale listing is huge.




Users browsing this thread:
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>