Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Hi Everyone !
#1

Hi - I'd just like to introduce myself as a new member - I have only been working with old radios of other makes for the last 6 months or so and am just tackling my first Philco - a type 610 tombstone. In spite of the fact that its been hacked around a fair bit as you'd probably expect, I'd have to say that I'm really impressed with its solid construction and design. I hope I can do it justice.

I can see that I have my work cut out for me this time, but all the important basic stuff - transformer and field coil etc are looking good so hopefully I'll get there in the end. Underneath all the gunge and fluff, the transformer looks almost like new - amazing really.

Anyway, my compliments on a great forum and thanks for the information posted here which has already been a lot of help - I reckon I can tackle those mysterious-looking bakelite cap blocks now !

Chris
#2

Hello, and welcome! The 610 is a good set to begin with. They are a pretty good radio when working right! With a good antenna you should easily pickup many distant broadcast and shortwave stations....
#3

Hi!

-Bill
#4

Welcome. You'll have a nice radio soon!
#5

Hey Chris and Welcome to the Phourm!!!
The 610 is a great set for your first. Pretty simple and it has no rubber wire or photo finish. Lots of repro parts available for it like the dial and knobs. Keep us posted with your progress and we'll guide you along when you have a question. Nice set from 1936.
Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#6

Hi and Welcome to the Phorum!!!

Gene
#7

Hello Chris and welcome!
Good luck on your 610, if you have any issues, or are unsure about doing something, let us know.
#8

Welcome aboard. Just in case you or anyone else doesn't realize it, Chuck has a separate Philco site. Between him and Ron, the world of Philco is at your finger tips.

http://www.philcorepairbench.com/

Phil aka Philbert Q. Desenex - Twin Cities, MN
#9

Welcome to the wonderful world of Philcos! Icon_thumbup

No matter where you go, there you are.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit.  That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Well...a chassis is metal. Magnetic or not, it does not matter. A transformer has some hum to it. It is natural....morzh — 08:40 PM
Shadow Meter Bulb
Ross I am not sure what current limiting effect the incandescent provides. They are two different parts of the sch...morzh — 08:31 PM
12' Philco
Bob Thanks for that photo. I have been looking for it, and I cannot find anythinmg on the web. I forgot it was here...morzh — 08:29 PM
Shadow Meter Bulb
I think after all has been said, I will use the same bulb that is specified for the dial pilot light which is a #55. I ...georgetownjohn — 07:31 PM
12' Philco
There was also this Philco! klondike98 — 07:25 PM
HiFi (Chifi) tube amp build - but my own design.
I expected a challenge and this is just part of it. But, it's also supposed to be fun, entertaining, informative and enj...TV MAN — 07:12 PM
Shadow Meter Bulb
Butting in here with a question. Since the shadow meter is connected directly to the 1st and 2nd I.F.'s wouldn't the met...RossH — 06:43 PM
HiFi (Chifi) tube amp build - but my own design.
Mike, Tim; you are about to enter the twilight zone. Doo doo doo doo, doo doo doo doo This is something alright. I'm go...RodB — 06:26 PM
HiFi (Chifi) tube amp build - but my own design.
:lol: We need to start a singing radio group! I play the guitar, so maybe get a few vocals? Anyways, Mike, I did try mou...TV MAN — 05:56 PM

[-]
Who's Online
There are currently no members online.

>