296 Concert Grand Radio & Phonograph
Posts: 163
Threads: 8
Joined: Jun 2011
City: Chicago,illinois
Today I found a model #296 Concert Grand radio and phonograph. This fits into a corner and has a record player with side record storage. I was told that about only 300 were made and cost $350.00 back in 1930. This is in excellent condition cabinet wise. I was unable to get a good look at the chassis. The asking price is $1995.00.The turntable is in perfect condition. Suppose to all work,"a certain guy is the only one allowed to demonstrate it". I found it during my lunch hour, at an antique store. It is beautiful. ![Icon_clap Icon_clap](https://philcoradio.com/phorum/images/smilies/icon_clap.gif) Ron... in your book 1928-1942 it only shows a drawing. I frequent this store and I'm sure they will let me take some photos. Let me know if you want me to try.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Take a look here.
http://www.philcoradio.com/gallery/1930b.htm#b
If you can get more pictures, sure, please do...thanks.
Compare the photo of the Concert Grand in the link above to the one in the antique store. If the front panel is not the same cloth with that elaborate pattern, then the cloth isn't original.
--
Ron Ramirez
Ferdinand IN
Posts: 163
Threads: 8
Joined: Jun 2011
City: Chicago,illinois
Ron...I'm almost positive that is the same cloth. I'll try and get some pictures within the next couple of days.
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Yikes, $1995!!!! I know that they aren't exactly common, and are a nice looking machine, but that's still a pretty steep price. If it was $500-$900 it would be more in the ballpark, although they don't come up for sale much but it's the cabinet that makes it special, the chassis inside is the same as a Philco 95.
Regards
Arran
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
I must agree, 1995.00 is a little steep. But they are pretty rare....
Posts: 2,023
Threads: 365
Joined: Jun 2010
City: Dover, OH
TA Forbes Wrote:I must agree, 1995.00 is a little steep. But they are pretty rare.... I concure the price seems steep, but seeing the production numbers are the same as the Zenith Strats, at least it isn't as steep as one of those. Pictures! Pictures! Pictures!
No matter where you go, there you are.
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Jayce Wrote:TA Forbes Wrote:I must agree, 1995.00 is a little steep. But they are pretty rare.... I concure the price seems steep, but seeing the production numbers are the same as the Zenith Strats, at least it isn't as steep as one of those. Pictures! Pictures! Pictures! ![Icon_biggrin Icon_biggrin](https://philcoradio.com/phorum/images/smilies/icon_biggrin.gif)
Production numbers aside I wouldn't use a Zenith Strat as an anology for anything, for one thing we are comparing apples to oranges since it's 4-5 newer, has a big black dial, and the name Zenith on it, if we were comparing a top model 1930 Zenith to a Concert Grand then it would. The 1000Zs also have two chassis in the back that are not shared with any other Zenith model, the Concert Grand is a Philco 95 or a 96 with a fancy cabinet and a phonograph. As special as they are Zenith Strats are outrageously overpriced, more then a top end RCA, more then a top end Stromberg, even more then a Scott or a McMurdo Silver. As a matter of fact most cars don't cost as much as a Zenith 1000Z, although I have heard that the price has dropped quite a bit from it's peak.
Regards
Arran
Posts: 163
Threads: 8
Joined: Jun 2011
City: Chicago,illinois
Here it is...
Note from site admin: Sorry, but the photos which were attached to this post are no longer available.
Posts: 163
Threads: 8
Joined: Jun 2011
City: Chicago,illinois
I have some more shots...and in a much higher resolution if anyone needs them.
The price is not firm.
Note from site admin: Sorry, but the photos which were attached to this post are no longer available.
Posts: 2,023
Threads: 365
Joined: Jun 2010
City: Dover, OH
Oooooo! Aaaaah! I think I'm in love! Heehee! Thanks for posting the pictures!
No matter where you go, there you are.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
To me, the cabinet looks like it has been stripped and refinished...
BUT...
at least they kept the original cloth on the front panel, and it looks like it is in amazing condition!
--
Ron Ramirez
Ferdinand IN
Posts: 163
Threads: 8
Joined: Jun 2011
City: Chicago,illinois
Stopped in there yesterday and looked at it again. The finish is original. The seller has 4 different consoles for sale. They all are original finishes. Here is another,the knobs are off and stored in a cabinet. The top opens to view the chassis. RCA??
Note from site admin: Sorry, but the photo which was attached to this post is no longer available.
Posts: 99
Threads: 18
Joined: Nov 2011
It's torture I tell yah!
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
The RCA looks like a cuustom cabinet. Can you get a pic of the chassis/speaker?
Posts: 163
Threads: 8
Joined: Jun 2011
City: Chicago,illinois
Can't see the speaker...the back is wood also just like the rest of the cabinet.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM |
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
Who's Online
|
There are currently no members online. |
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|