Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Farm radio consoles
#1

Anybody have one of these in their collection or ever seen one for sale? I would like to have one in my collection. I like the 1941 year models.
thanks
chris
#2

You could post a "Wanted" ad in the Philco Wanted section of the Phorum, Chris. Who knows, you might get lucky. Icon_smile

These sets usually go begging at swap meets and such, as there is very little interest in them. Most people prefer AC operated receivers.

Are there any antique radio clubs near you? Might be worth looking into. Perhaps the Kutztown, PA swap meets (held twice a year, spring and fall) are within a decent driving distance of you?

--
Ron Ramirez
Ferdinand IN
#3

Ron,
Yes I do belong to our local antique radio club. Schenectady, NY will ask around there. Where is the Kutztown meet in Penn? I don't get out that much due to work and family. I prefer AC also but the farm sets are simple and I find them neat.

thanks
Chris
#4

Chris,

I think I know what you mean about farm radios. I'm starting to run into them a little more often, and I actually enjoy working on them. Once I got past figuring out battery voltages etc., they wen't too bad to deal with. Although they can be a little intimidating.

All my farm radios are table models - 2 Zeniths, 2 Coronados, and 2 Philcos, a 40-95 and a 42-122. Pictures of the 42-122 can be found in an earlier thread on the Phorum.

http://www.philcoradio.com/phorum/showthread.php?tid=2

Haven't run into any farm consoles. Since it's the same problem as AC consoles (take up too much room), I don't foresee one in the future. Icon_smile

Good luck with your search.

Bill

Sent from my Pentium II on the AT&T Dial Network
#5

Chris

Kutztown is southwest of Allentown, between Allentown and Reading, off US 222 on the south side of town.

More info may be found here (note: this page advertises the 2006 meets, but this will give you an idea):
http://www.renningers.com/kutzradio.htm

I've never attended this meet, but I hear it is a very good one. (I drove through on US 222 in an eighteen wheeler when I was driving a big truck earlier this year, which is why I sort of know where Kutztown is.)

--
Ron Ramirez
Ferdinand IN
#6

Chris,

Half the fun of working with farm radios is putting together power supplies and battery packs for them. Many of the simpler circuit radios require a 1 1/2V "A" and a 90V "B" battery, which are simple enough to either put together an AC supply or build a battery unit for them.

At a fall radio club meet last year, we had a theme for the meeting of "bring in your summer finds", and I brought in the 42-122. Mine was the only radio that worked - it had a battery pack in it that I built. I had more questions about the battery pack than the radio! [What I did was inside a Radio Shack project box, I had 10 9V batteries in series and 2 flashlight "D" cells in parallel - it'll run the radio for hours!]

Should you want to go authentic, contact Bill Morris, the "Battery Maker". He can be contacted at "batterymaker at gmail dot com". He does some amazing work building replica batteries.

Bill

Sent from my Pentium II on the AT&T Dial Network
#7

Chris,

There's one waiting for you about 2 hours west of Albany. It's a 39-85, details on that other forum, in reply to your post there.

John

73 de KC2HET

See my small collection at:
http://www.citlink.net/~jsaxe/Radios
#8

John,
Sent you a PM on this. Would like to see some pictures of the radio.
thanks a lot,
Chris




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM

[-]
Who's Online
There are currently 7183 online users. [Complete List]
» 4 Member(s) | 7179 Guest(s)
AvatarAvatarAvatarAvatar

>