Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 1934 Model 60mb
#1

Can Anyone tell me if there was ever a home users manual and service/repair manual for this model 60mb (modern baby grand), I cannot find one anywhere, i've hunted the net for weeks and nothing, any help would be truly appreciated especially if any one has a copy of the Home Users Manual
#2

Hi and Welcome to the phourm!
Here's the service info for the model 60.
http://www.nostalgiaair.org/Resources/793/M0013793.htm
Terry
#3

(02-26-2012, 10:50 PM)7estatdef Wrote:  Hi and Welcome to the phourm!
Here's the service info for the model 60.
http://www.nostalgiaair.org/Resources/793/M0013793.htm
Terry

Hi Terry,

Thanks so much for this service info ! Do you happen to know if there would have ever been an instruction book for the owner of this radio?
Truly
Dave
#4

Also, look here. http://www.philcoradio.com/tech/60evol.htm

Steve

M R Radios   C M Tubes
#5

(02-27-2012, 01:52 PM)Steve Davis Wrote:  Also, look here. http://www.philcoradio.com/tech/60evol.htm

Steve

Thanks Steve! This was interesting and helpful
Regards
Dave
#6

(02-27-2012, 01:28 PM)d smith Wrote:  
(02-26-2012, 10:50 PM)7estatdef Wrote:  Hi and Welcome to the phourm!
Here's the service info for the model 60.
http://www.nostalgiaair.org/Resources/793/M0013793.htm
Terry

Hi Terry,

Thanks so much for this service info ! Do you happen to know if there would have ever been an instruction book for the owner of this radio?
Truly
Dave

There was a 1 or 2 page paper that would show you how to operate the set but it was gotten rid of 80yrs ago. Most folks could figure how to work it without the instructions
Terry
#7

(02-27-2012, 10:23 PM)7estatdef Wrote:  
(02-27-2012, 01:28 PM)d smith Wrote:  
(02-26-2012, 10:50 PM)7estatdef Wrote:  Hi and Welcome to the phourm!
Here's the service info for the model 60.
http://www.nostalgiaair.org/Resources/793/M0013793.htm
Terry

Hi Terry,

Thanks so much for this service info ! Do you happen to know if there would have ever been an instruction book for the owner of this radio?
Truly
Dave

There was a 1 or 2 page paper that would show you how to operate the set but it was gotten rid of 80yrs ago. Most folks could figure how to work it without the instructions
Terry

That explains why I cant find one then!
Just would have been nice to have seen it though.
Regards
Dave




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Restoring Philco 37-604C
So, I put the wires back to the power switch, plugged it in, slowly increasing the Variac output...nothing. No DC, not e...morzh — 08:40 PM
Delco car radio Peko vibrator converstion issues
Rich, There is an Australian website (Cool386.com) that has much useful info regarding repair and restoration of vibr...Joe Rossi — 07:29 PM
Jackson 715 not working
Mrfixr55, its working now. I cleaned the switches and sockets with spray cleaner. Thanks for helping on this one.daveone23 — 06:26 PM
Jackson 715 not working
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM

[-]
Who's Online
There are currently no members online.

>