Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

philco model 44
#1

this is my first post i am restoring a philco model 44 and it has parts removed could use picture of the chaissis in restored or untouched condition to help restore
#2

Welcome! I have a recently acquired 44B, but it's been modified a bit...a 1/4" jack has been added in back of the chassis. If you think this will help anyway, I can try to get a picture made this weekend...

--
Ron Ramirez
Ferdinand IN
#3

thanks i can use your picture all the paper capacitors are removed from the chaissis the filter capacitors are still there with no wires leading to them
#4

Okay, here's the photo...I warned you, it was modified to add a phono jack - and not only that, electrolytic capacitors were tacked in years ago.

[Image: http://www.philcoradio.com/ebay/44chas_sm.jpg]

Here's a link to a higher-resolution version - please let me know when you get it, as I am not going to leave this up on the server:

http://www.philcoradio.com/ebay/44chas.jpg

I hope it helps in some way.

--
Ron Ramirez
Ferdinand IN
#5

thanks i made a copy of it and stored it in my computer. it looks pretty good.
#6

If you still need a good pic of a virgin 44 chassis, I just found mine. Email me at "lawnweeds100" at Yahoo.com.

Pete AI2V




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM

[-]
Who's Online
There are currently no members online.

>