Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Just brought home an EH Scott Allwave 15 from an estate sale, thanks to Ron for instant help in identifying this set from the picture and the encouragement to go and get it. Don't know much about EH Scotts. Chrome looks pretty good, all tube shields and coil covers, transformer shells are present, cabinet only minor nicks here & there, no apparent tears in the Scott pedestal speaker, looks to be complete and this radio, even without the amp chassis in the cabinet is HEAVY! Came with the instructions manual.
I'll post some pix when I figure out how. Got to get my genius brother to help me figure things out I'm not that compooter savvy.
Mike
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
(03-19-2012, 11:50 AM)Mikhail7 Wrote: Just brought home an EH Scott Allwave 15 from an estate sale, thanks to Ron for instant help in identifying this set from the picture and the encouragement to go and get it. Don't know much about EH Scotts. Chrome looks pretty good, all tube shields and coil covers, transformer shells are present, cabinet only minor nicks here & there, no apparent tears in the Scott pedestal speaker, looks to be complete and this radio, even without the amp chassis in the cabinet is HEAVY! Came with the instructions manual.
I'll post some pix when I figure out how. Got to get my genius brother to help me figure things out I'm not that compooter savvy.
Mike
Congratulations, you have a treasure. I'm sure you will take the restoration slow and steady. Withe this type of set, you are self elevated from restorer to curator, if you get my drift.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Hi Codefox,
Thanks, just the look of the chrome shouts CLASS! I had no idea what the radio was in the sale picture so I sent it to Ron. A really quick ID too. He persuaded me I should go for it.
I never dreamed this downtown lackey might actually rub shoulders with the Hahvard gentry. Oh, do turn on the stock report and fluff me, won't you, Gilligan?
Mike
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Hi TA,
Thanks, I think we posted at the same time.
Me, I'd have said who'd a thunk it, this ritzy radio showing up like it did. Ron says he's never seen the style cabinet it's in. It isn't anything really ornate but it's in pretty good shape. I feel very privileged to have found this and the 37-690 in November.
Mike
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Has anyone here ever removed a chassis from the cabinet of this era of an EH Scott? Seems like there's some nuts that require a nut driver for removal from the top, there's nothing on the bottom of the chassis board.
Mike
Posts: 8
Threads: 2
Joined: Jan 2022
City: Christchurch
State, Province, Country: New Zealand
I've just taken one of these sets in for restoration. What a behemoth! After re-stuffing all the wee capacitor cans & replacing all out-of-spec resistors, I have the powered it up. The audio & IF sections are all fine but I cannot get the local oscillator to cooperate. Any suggestions? Also the mixer tube in this particular set is a 58, not a 2A7 as the two circuits I have found, show. The circuit of the audio amp is also a bit different. The detector is the full-wave type using both diodes of the 55 valve and the Radio Museum info suggests that this was employed in a later version of the circuit but the 58 mixer would suggest otherwise. I therefore assume that there are other circuits somewhere out there. All very interesting. Michael, does your manual contain a circuit that you could copy for me please?
Posts: 1,975
Threads: 147
Joined: Jan 2013
City: Westland, MI
Hello Philconut. This thread is over twelve years old. I am sorry to inform you that Michael Dennis passed away several years ago. Looking under his name you see the status "silent key". That's to let others know that they are deceased. Take care and BE HEALTHY! Gary
"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Model 28L
|
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM |
37-60 revision 6
|
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM |
Shadow Meter Bulb
|
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM |
Hickok AC51 tube tester
|
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM |
Model 28L
|
Hello,
I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020.
Can...HORSTE — 10:32 AM |
Philco 42-1008 conversion kit
|
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit. That would rem...alangard — 09:30 PM |
HiFi (Chifi) tube amp build - but my own design.
|
Tim
Well...a chassis is metal. Magnetic or not, it does not matter.
A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM |
Hickok AC51 tube tester
|
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM |
Shadow Meter Bulb
|
Ross
I am not sure what current limiting effect the incandescent provides.
They are two different parts of the sch...morzh — 08:31 PM |
12' Philco
|
Bob
Thanks for that photo.
I have been looking for it, and I cannot find anythinmg on the web.
I forgot it was here...morzh — 08:29 PM |
Who's Online
|
There are currently 5797 online users. [Complete List] » 2 Member(s) | 5795 Guest(s)
|
|
|
|