Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

E H Scott Allwave 15
#1

Just brought home an EH Scott Allwave 15 from an estate sale, thanks to Ron for instant help in identifying this set from the picture and the encouragement to go and get it. Don't know much about EH Scotts. Chrome looks pretty good, all tube shields and coil covers, transformer shells are present, cabinet only minor nicks here & there, no apparent tears in the Scott pedestal speaker, looks to be complete and this radio, even without the amp chassis in the cabinet is HEAVY! Came with the instructions manual.

I'll post some pix when I figure out how. Got to get my genius brother to help me figure things out I'm not that compooter savvy.

Mike
#2

(03-19-2012, 11:50 AM)Mikhail7 Wrote:  Just brought home an EH Scott Allwave 15 from an estate sale, thanks to Ron for instant help in identifying this set from the picture and the encouragement to go and get it. Don't know much about EH Scotts. Chrome looks pretty good, all tube shields and coil covers, transformer shells are present, cabinet only minor nicks here & there, no apparent tears in the Scott pedestal speaker, looks to be complete and this radio, even without the amp chassis in the cabinet is HEAVY! Came with the instructions manual.

I'll post some pix when I figure out how. Got to get my genius brother to help me figure things out I'm not that compooter savvy.

Mike

Congratulations, you have a treasure. I'm sure you will take the restoration slow and steady. Withe this type of set, you are self elevated from restorer to curator, if you get my drift.
#3

Wow, Mike, that's quite a score!!! That's a pretty high buck set, definitely worth doing right!

Icon_thumbupIcon_thumbupIcon_thumbup
#4

Hi Codefox,

Thanks, just the look of the chrome shouts CLASS! I had no idea what the radio was in the sale picture so I sent it to Ron. A really quick ID too. He persuaded me I should go for it.

I never dreamed this downtown lackey might actually rub shoulders with the Hahvard gentry. Oh, do turn on the stock report and fluff me, won't you, Gilligan?

Mike
#5

Hi TA,

Thanks, I think we posted at the same time.

Me, I'd have said who'd a thunk it, this ritzy radio showing up like it did. Ron says he's never seen the style cabinet it's in. It isn't anything really ornate but it's in pretty good shape. I feel very privileged to have found this and the 37-690 in November.

Mike
#6

Has anyone here ever removed a chassis from the cabinet of this era of an EH Scott? Seems like there's some nuts that require a nut driver for removal from the top, there's nothing on the bottom of the chassis board.

Mike
#7

I've just taken one of these sets in for restoration. What a behemoth! After re-stuffing all the wee capacitor cans & replacing all out-of-spec resistors, I have the powered it up. The audio & IF sections are all fine but I cannot get the local oscillator to cooperate. Any suggestions? Also the mixer tube in this particular set is a 58, not a 2A7 as the two circuits I have found, show. The circuit of the audio amp is also a bit different. The detector is the full-wave type using both diodes of the 55 valve and the Radio Museum info suggests that this was employed in a later version of the circuit but the 58 mixer would suggest otherwise. I therefore assume that there are other circuits somewhere out there. All very interesting. Michael, does your manual contain a circuit that you could copy for me please?
#8

Hello Philconut. This thread is over twelve years old. I am sorry to inform you that Michael Dennis passed away several years ago. Looking under his name you see the status "silent key". That's to let others know that they are deceased. Take care and BE HEALTHY! Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM

[-]
Who's Online
There are currently 4170 online users. [Complete List]
» 3 Member(s) | 4167 Guest(s)
AvatarAvatarAvatar

>