Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

PHILCO 48-200 BAKELITE TUBE RADIO
#1

Is this radio: PHILCO 48-200 BAKELITE TUBE RADIO, a good one?

Easy to work on; fix and restore?
Is it sort after by collectors?

Any help would be appreciated.

TommyR Icon_smile
#2

All Philcos are good ones Icon_biggrin I have restored a couple of them and were not that hard for a beginner like me. They are fairly common I think but still a nice little radio. Do you have the brown or ivory version?
Chris
#3

Chris Drumma Wrote:All Philcos are good ones Icon_biggrin I have restored a couple of them and were not that hard for a beginner like me. They are fairly common I think but still a nice little radio. Do you have the brown or ivory version?
Chris

Hi Chris:

It's a brown one. It's in excellent shape with the exception of a crack running along the top left of the case.

It was modified, the line cord looks new but very short (non polarized) and one side of the line is going to a 3ag fuse and power resistor, there is also a disc cap or mov across it. All this is placed on a small board affixed to the top of the case inside.

It plays good, although there are more stations coming in from mid to end of band then from the beginning to mid?

Very clean inside and out.

What do you think?

TommyR Icon_smile




Users browsing this thread:
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>