Opinions on pricing for Clarion AC-51
Posts: 16,481
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Someone (who I bought a radio from before) offered me to buy directly a Clarion AC-51 radio, a console, in a decent enough condition (cabinet and chassis).
It is a beautiful radio (a guy sent me some photos).
But the radio is not awfully abundant around, so I cannot size up the price by comparison.
Any opinions what a console (it is presumed it will need a restoration; on the photos the tubes are glowing so the power must be OK) like this should be worth?
Posts: 671
Threads: 147
Joined: Jun 2011
City: Elko,MN.
I sold one of these last fall minus the tubes for $45.00.
Cabinet was nice,chassis needed some work.
murf
Posts: 16,481
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I can tell you how much the guy wants for it (it's on e-bay). More than 10 times that.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
It's not worth 400.00. It's in nice shape, maybeuncommon, but it's not worth that.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
I noted that he had a reserve on it. Now that it has ended, do you know what the reserve was.
Also noted that in a previous listing his buy it now was 800.00. His sense of value for this set is greatly exaggerated.
Posts: 671
Threads: 147
Joined: Jun 2011
City: Elko,MN.
(04-26-2012, 07:32 PM)TA Forbes Wrote: It's not worth 400.00. It's in nice shape, maybeuncommon, but it's not worth that.
WHen I bought mine,I paid $15.00 for it.
Had no tubes and needed work on the power supply end of it.
Had a short somewhere in the B+.
Lots of rotten wires too.
murf
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Hello, Murf: did you ever get it working?
Posts: 16,481
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Well.....I'd say a radio like this one in a really nice condition could possibly be close to 200 bucks.
I bought a radio of him once; my next project; I saw the bids (enough of them) climb to 280, and the reserve was not met. When the radio did not sell, I asked him, and he said it was 350 (I gave him 300, judging by the bid history and my unwillingness to search flea markets for lower prices myself). Also he lived close to where I worked, a 20-minute drive, so I could pick it up (shipping a radio like this could cost a lot).
So, this time I suspect his reserve is even more.
I don't think is worth that much though.
SO far I did not ask him what his reserve was.
Posts: 671
Threads: 147
Joined: Jun 2011
City: Elko,MN.
(04-26-2012, 09:11 PM)TA Forbes Wrote: Hello, Murf: did you ever get it working?
Nope,
Sold it to a guy for $45.
Did not want to spend alot of time on it.
Posts: 4,864
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
This is someone who quite clearly has a delusional sense of value to say the least, maybe he's related to the weirdo in Whitby, Ontario? Clarion was a brand name for radios manufactured by the America Transformer Company or Amertran. I haven't heard or read anything bad about them but there isn't really anything unique or special about Clarion sets, they are just your typical 1929 to 32 TRF set with your typical string of 2.5 volt AC tubes, like a hundred other sets of the same era. On top of that they are a bit of an off brand so nobody is really seeking them out like a Zenith, or an Atwater Kent, or a Philco of course.
Typical TRF late 20s early 30s consoles don't usually crack the $125 mark in good original condition, and a lot less then that if they need cabinet work or have parts missing. The reason being is that they are all pretty similar, similar circuitry, similar cabinet styles, without reading the name on the escutcheon it's hard to tell them apart sometimes. I have a few myself and I doubt whether I paid more then $75 for any of them.
Regards
Arran
Posts: 16,481
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Thanks guys, at least I have an idea. I kind of was puzzled with the asking price, but did not know the real market value.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Refinishing Ideas
|
Hi Poulsbobl,
I think that you could get away with it. In the Philco Library, there is a parts listand specs for sp...MrFixr55 — 11:54 PM |
Philco 46-480 Electronic Restoration
|
The sleeving for the transformer arrived early, so I went ahead and finished reassembling. The chassis looks far better ...jrblasde — 10:15 PM |
Philco 610B oscillator wiring
|
I don't know what you are referring to when you say "tube cathode ground". Ground is a connection to the chass...RodB — 05:56 PM |
Zenith H725
|
Good points, Arran. I haven't encountered this problem with any other radio (all earlier vintages), so am learning here....EdHolland — 05:32 PM |
Zenith H725
|
Ed;
One thing that I will say about these is that Brand Z was considerate enough to make these mica caps easily acces...Arran — 02:34 PM |
Philco 610B oscillator wiring
|
Do you know what run # your chassis is?
It took me a while to find what you were basing updates/modification on as I did...Radioroslyn — 07:34 AM |
Need to purchase some accessories for restoration of my Old Philco Radio
|
COLLEAGUES,
Thank you all for such good and important suggestions as how to find good replacement parts. I will go fo...palonso — 07:05 AM |
Zenith H725
|
Here's what the inside of AM IFT2 looked like, and the other pic shows the discs I made to take place of the mica and ke...EdHolland — 07:40 PM |
Zenith H725
|
IF2 will need replacement caps. The arcing was severe enough that the mica is pitted and holed where the HT flashed over...EdHolland — 04:04 PM |
My Philco 37-116 Restore
|
Measuring from center tap like the tube voltages show. Cap 127 is isolated from ground. Cap 127 shown in upper left of p...dconant — 08:05 AM |
Who's Online
|
There are currently no members online. |
|

|