Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

howards finish restorer
#1

Hi guy's,
I bought a can of Howards finish restorer and tried it out on my Philco 38-116 console tonight.
Cabinet had your usual scratches and nicks etc.,but the finish was still nice and glossy.
Went over it with the product(walnut color)with some 0000 steel wool and buffed it with a clean rag.
Looks pretty darn good.
Hides the scratches and scuffs really good.
Tomorrow I will put a coat of Howards Feed-N-Wax on it to really shine it up and preserve the finish.
If you have a cabinet that is in pretty good shape,this stuff will make it look decent again for a few hours of scrubbing and polishing.
murf
#2

Hmmmmm!8)
#3

(04-27-2012, 09:45 PM)TA Forbes Wrote:  Hmmmmm!8)

Skeptical?
I was too.
Will try the wax treatment and send a pic of the finished cabinet.
Sure was easier than stripping and re-finishing.
Seems that alot of people prefer the original finish and think the radio is not worth as much all dolled up with a better than new finish.
#4

(04-27-2012, 10:07 PM)murf Wrote:  
(04-27-2012, 09:45 PM)TA Forbes Wrote:  Hmmmmm!8)

Skeptical?
I was too.
Will try the wax treatment and send a pic of the finished cabinet.
Sure was easier than stripping and re-finishing.
Seems that alot of people prefer the original finish and think the radio is not worth as much all dolled up with a better than new finish.

I prefer the original finish if it is close to perfect. Otherwise, prices on E-pay would suggest that a nicely refinished radio is worth more than a rough one.

Tong oil will give the same results. Time will require additional applications as the original finish continues to deteriorate. Also a topical coat such as you are using may penetrate cracks in the finish resulting in streaking as it penetrates the wood under the original finish.

What is better than new anyway?
#5

(04-28-2012, 12:40 AM)Phlogiston Wrote:  I prefer the original finish if it is close to perfect. Otherwise, prices on E-pay would suggest that a nicely refinished radio is worth more than a rough one.

Based on foggys stuff, I would say a badly refinished radio brings the most on ebay! Icon_lol

John
Las Vegas, NV USA
#6

(04-28-2012, 09:41 AM)LASJayhawk Wrote:  
(04-28-2012, 12:40 AM)Phlogiston Wrote:  I prefer the original finish if it is close to perfect. Otherwise, prices on E-pay would suggest that a nicely refinished radio is worth more than a rough one.

Based on foggys stuff, I would say a badly refinished radio brings the most on ebay! Icon_lol

Sad, but this is also true.





Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Speaker Replacement
I can't remember, but there was a particular product for loosening glue on the more modern "spiders", used pos...MrFixr55 — 09:43 PM
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM

[-]
Who's Online
There are currently no members online.

>