Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 89 Filter Cap Can Dimensions?
#1

I'm trying to make this Philco model 89 as original as possible. I'd like to know if anyone can tell me the length and diameter of the original filter cap cans that mounted on the chassis via a strap assembly. I've looked around and can't find any original cans but if I can get the dimensions I can try to find two cans that will work. Preferably two matching cans.

If someone can give me these dimensions I sure would appreciate it.

Thanks much,
Pepper

"It's Nice To Be Nice To The Nice"
Major Frank Burns Mash 4077th
#2

Do you have the Phico part number? If so, I could see if it is the same as my 18 while I have it apart.
#3

I don't have the originals of course but the part number on my paperwork calls them out as #44 & #46. Part numbers 8165 and 8166 respectively. My paperwork is for models 89 & 19 but if the model 18 is similar those will do.

Pepper

"It's Nice To Be Nice To The Nice"
Major Frank Burns Mash 4077th
#4

Large 4" tall, Small 3-1/4" tall, both are 1-3/8" across. Remember that both have cardboard insulators between cap and mount. but since they dont mount flush to the top of chassis you could use taller caps and just mount them deeper into the clamp.
#5

Thanks tab! Now I go looking for a couple of cans.

Pepper

"It's Nice To Be Nice To The Nice"
Major Frank Burns Mash 4077th




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently no members online.

>